-
Need help keeping hold of your phone? Here’s how to make a cute chain and rhinestone phone strap so its harder to lose!
I’m loving making phone straps lately! This one combines a chunky chain with some rhinestone trim to create this double stranded phone strap. I decided to add the extra chain for more strength! Please note that this tutorial contains affiliate links.
You will need the following tools and materials to make this phone strap:
1: Pliers. I used my flat nose pliers, round nose pliers and cutting pliers. I also used scissors to trim my string.
2: A piece of chain about 30cm long. I used this silver tone chunky curb chain.
3: A piece of rhinestone trim about the same length as the chain.
4: Two crimp ends.
5: A large jump ring.
6: A piece of string. I used this hot pink nylon string that I cut to be about 15cm long.
7: Super glue.
Follow these steps to make your rhinestone phone strap:
1: Take one end of the rhinestone strand and place it in one of the crimp ends.
2: Squash one side of the crimp around the end of the rhinestones using the flat nose pliers.
3: Repeat the squeezing of the crimp for the other side, folding it around the end of the rhinestones. Squeeze until the crimp feels securely attached to the rhinestone strand.
4: Repeat steps 2 and 3 for the other end of the rhinestone chain.
5: Add one end of the chain and rhinestone strand to the jump ring.
6: Add the other end of the chain and rhinestone strand to the jump ring in the same order.
7: Close the jump ring using your pliers.
8: Fold the string in half and tie the open ends around the jump ring, loop and knot it a few times to secure it.
9: Trim the ends of the string.
10: Add a dab of super glue to the ends of the string to secure the knot.
Now your double strand phone strap is finished and ready to pop on your phone. Loop it through on of the holes on your phone case for more phone customisation!
-
How to make a rhinestone glasses chain!
I think glasses chains are so cool! This glasses chain design is super glam, made from a sparkly rhinestone string for some practical glamour! Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to do this DIY:
1: A length of rhinestone chain at a length you like. Check this by wrapping it around the back of your neck and seeing where it falls against your chest.
2: Pliers. I used my cutting pliers to cut the rhinestone chain. I also used my flat nose pliers and round nose pliers.
3: Crimp ends that fit around the rhinestones. I used these rose gold coloured ones.
4: Two jump rings.
5: Two rubber glassses holders.
Follow these steps to make your cute rhinestone glasses chain:
1: Take one end of the rhinestone chain and place it inside one of the crimp ends.
2: Squash one side of the crimp end around the rhinestone strand using the flat nose pliers. Be careful here because the rhinestones like to pop out.
3: Squash the other side of the crimp around the rhinestones and the first side using the flat nose pliers again. Now your crimp end should be secured onto the strand.
4: Repeat step 3 for the second crimp end on the other side of the rhinestone chain.
5: Add a jump ring to one end of the chain and use it to secure the rubber glasses holder in place. Repeat this for the other end of the chain to finish your DIY off.
Now your rhinestone glasses chain is ready to use! Pop them onto your favorite spectacles or sunnies and shine on.
Here are some other rhinestone DIY’s you can make:
- A rhinestone embellished hair comb
- This cute pair of rhinestone alligator hair clips
- These two different rhinestone headbands
- Some crazy rhinestone statement earrings, check them out here and here
- An amazing rhinestone brooch
-
Need a sparkly accessory to cheer up the 2020 silly season? Make this waist chain in time for Christmas this year!
2020 has been wild and hard for lots of people. Some sparkly accessories might not fix anything, but they might help cheer you up a little bit! Please note that this tutorial contains affiliate links.
Here are all the things you need to make this waist chain:
1: Some rhinestone chain long enough to fit comfortably around your waist.
2: Pliers. I used my cutting pliers to cut my chain to length. I also used my flat nose and round nose pliers.
3: A couple of jump rings.
4: Two crimp ends.
5: A large lobster clasp.
Follow these steps to DIY your own fun sparkly waist chain:
1: Add one of the crimp ends to one end of your chain, holding it in place around the chain.
2: Squash one side of the crimp around the rhinestone chain using the flat nose pliers. Be careful with this step to ensure that the chain doesn’t pop out of the crimp.
3: Squash the other side of the crimp to secure it onto the strand.
4: Repeat steps 2 and 3 using the other crimp on the other side of the rhinestone strand.
5: Add a jump ring to one end of the strand and attach the lobster clasp. Secure the clasp in place by closing the jump ring.
6: Add the remaining jump ring to the other side of the waist chain to finish it off. Now your rhinestone waist chain is finished and ready to wear! I hope it brings some necessary sparkle into your life!
