-
Here’s a fun one to make! Here’s how to make a beaded wiggle bracelet.
This design is a little tricky to make but it looks amazing! Using some chain, tiger tail wire and beads, you can create an interesting, almost sculptural, bracelet to wear. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this bracelet:
1: Some tiger-tail wire, I used about 1m of wire to make mine. I suggest cutting off slightly more than you need so you don’t run out.
2: A piece of chain that is bracelet length. I used a piece recycled from an old project that I took apart.
3: Two jump rings.
4: Four crimp beads.
5: A clasp.
6: Beads. I used these gold glass beads.
6: Your jewelry pliers. I used my cutting pliers, round nose and flat nose pliers.
Follow these steps to make your own wiggle bracelet:
1: Add two crimp beads and a jump ring to one end of the wire.
2: Loop the end of the wire around the jump ring and back through the crimps.
3: Squash the crimp beads using the flat nose pliers.
4: Attach the wire to the chain using the jump ring.
5: Add some beads to the wire. I added 6 beads.
6: Thread the end of the wire through a link in the chain, I threaded mine through the 7th link of the chain. You want the distance between links to be shorter than the length of each beaded section in order to make an arch shape.
7: Repeat steps 5 and 6, adding another 6 beads and threading it through another link on the opposite side of the chain, 7 links away from the first loop.
8: Keep beading and looping the wire until the chain is early complete, with just one loop to go.
9: Add the second jump ring to the end of the chain.
10: Add the last 6 beads and two crimp beads.
11: Loop the end of the tiger tail wire around the jump ring at the end and back through the crimps and end beads.
12: Squash the crimp beads.
13: Trim the excess wire.
14: Add the clasp to one end of the bracelet to finish it off! Now your fun wiggle bracelet is finished.
Here’s what the wiggle bracelet looks like when it’s being worn!
-
Flowers are so pretty! Here’s how to make a beaded flower choker…
I’ve already shown you how to make a cute daisy chain necklace, but here’s a way to add a bit of edge to your floral bead designs… a daisy chain choker necklace! This tutorial gives you all the steps to follow to make a beaded choker necklace using glass seed beads and tiger tail wire. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your beaded flower choker:
1: Pliers. I used my cutting, round nose and flat nose pliers.
2: Tiger tail wire, because of the looping to create the flowers, you need a bit extra than the intended length. I cut about 1.5m of wire and had some leftover that I will use in another design.
3: A clasp and jump ring.
4: Crimp beads.
5: Beads. I used some recycled red seed beads for the flowers and some green and purple seed beads for the rest of the choker.
Green seed beads:
Purple seed beads:
Follow these steps to make your cute flower choker necklace:
1: Add two crimps to the end of the wire.
2: Add the clasp to the wire and fold it around and back through the crimps.
3: Squash the crimp beads using the flat nose pliers.
4: Add the green beads to the wire. I added 10 beads but you can add more or less depending on the pattern you want to make.
5: Add 6 red beads (or whatever colour you chose for your flowers) to the wire.
6: Take the end of the wire and thread it through the first red bead.
7: Pull the wire tight to create a circle shape with the beads. Make sure you shift the beads down as you tighten the wire so that the circle sits closely to the green beads.
8: Add a single bead to the wire in your third colour, this will be the middle of the bead.
9: Place the bead in the middle of the flower and then thread the end of the wire through one of the flower beads to secure the middle bead in place. Now you have your first flower.
10: Repeat steps 4 to 9 until you have a length that fits closely around your neck to make a choker.
11: Add the second set of crimp beads and a jump ring to the wire.
12: Loop the wire around the jump ring and back through the crimps and the beads at the end of the necklace, pulling the wire tight.
13: Squash the crimps using the flat nose pliers.
14: Trim the excess wire.
Now your floral choker is finished and ready to wear! How cute! What colours will you use in yours?
Here’s what it looks like on!
Here are some other beaded flower tutorials you can try:
-
Tips to elevate your handmade pieces!
I love jewelry, I love looking at it, I love making it, and I love wearing it. But there are some parts of jewelry that I don’t love. I can’t stand it when a piece is uncomfortable and scratchy to wear, and I also can’t stand poorly constructed jewelry that looks like it will fall apart after two wears, so I thought it would be fun to share with you some things to look out for so that you always make strong, comfortable jewels that you will enjoy for years to come.
Here are my tips for making long-lasting, professional looking and comfortable jewelry:
1: Make sure you tuck away the ends of the tiger-tail wire. I usually achieve this by running the wire through a few of the beads at each end of my beaded designs so that it doesn’t poke out. You can also use a crimp cover which covers any sharp ends of the wire. You can see some examples below.
Look at the ends of this beaded strand, the ends of the wire are hidden under the beads. Follow the tutorial for this necklace here. 
The crimp cover on this earring charm protects you from being scratched by the wire. Tutorial for these earrings here. 2: Avoid using elastic in your designs. Elastic might be easy to put on and take off (and in some cases, is the only appropriate option in terms of accessibility). Unfortunately, this accessibility comes with a trade off, elastic tends to wear out quickly, and you can find your beautiful bracelet scattered all over the floor at the most inopportune moment. I suggest making your beaded jewels with nylon beading thread or tiger-tail wire for a longer life span. I’ve got a post about the pros and cons of different beading materials here.
Here’s a bracelet I found a while ago that was made from elastic. Unfortunately it had broken and been lost to its original owner! 
I’m yet to experience any of my tiger-tail beaded pieces breaking on me, I suggest choosing it if you are looking for durability in your designs. Full tutorial here. 3: Pull your wire tight at each end of your beaded pieces. I’ve noticed with the trend towards beaded jewelry in recent years, beaded tiger-tail necklaces are being sold with large loops at each end. This loose loop can catch on things and lead to breakages. I also personally think it looks sloppy and makes your work seem less polished.
I think this anklet with tightly finished ends looks a lot neater than a loosely looped wire. You can follow the steps to make your own anklet here. 
Don’t leave big loops like this on your jewelry pieces, they can catch on things and don’t look as polished. 4: Try to use precious metals! I spent a long time making jewelry using findings made from base metals. While these materials are cheaper and great for when you’re starting out, I think investing in fine metals such as sterling silver, is a great way to elevate your designs and make them seem more polished and professional.
A sterling silver clasp elevates this beaded bracelet. You can see the tutorial for this bracelet here. 
Sterling silver wire goes a long way! Some silver wire can be transformed into many sleek, minimalist jewellery designs with minimal effort. Tutorial to make these here. Here are some sterling silver materials you can buy and use in your designs:
5: I don’t always follow my own advice, but when you are making beaded pieces with pearls, it can pay to spend some extra time knotting your beading thread between each pearl. This technique not only protects the pearls, it also stops you from losing them all in the case of a breakage! I have’t made a pearl knotting tutorial yet, but I think there will be one on the way soon so keep an eye out.
This pearl bracelet features individually knotted pearls. So there you have it, a few tips and tricks to elevate your jewelry making to that next level! Please note that this post contains affiliate links.
-
Here’s how to make a sweet daisy chain necklace using tiger tail wire!
Daisy chains are a classic beaded jewellery technique, and they look amazing! Here’s how to make one using some tiger tail wire and a selection of glass beads. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this daisy chain necklace:
1: A length of tiger tail wire, you’ll need quite a lot as the daisy chain technique uses some extra wire. I cut mine about 4x the length I wanted for my necklace, approximately 1.5m long. I suggest using your best guess rather than taking an exact measurement.
2: Some beads. I used a variety of glass beads including recycled orange e-beads, some gold tone beads and some blue seed beads.
Blue seed beads: https://amzn.to/3S8agp8
3: Four crimp beads.
4: A clasp and jump ring. I used a gold-filled parrot clasp.
5: Pliers. I used cutting pliers, round nose pliers and cutting pliers to finish my necklace.
Follow these steps to make your beaded daisy chain necklace:
1: Add two crimp beads and the clasp to the end of the wire.
2: Fold the wire around the clasp and back through the crimps.
3: Squash the crimp beads to secure the clasp to the end of the wire.
4: Begin adding beads. I made mine a pattern of blue beads and orange flowers so started by adding 15 blue seed beads.
5: Add six beads for your first flower.
6: Take the end of the wire and thread it through the first flower bead to form a circle shape.
7: Pull the wire tight and add another bead to make the centre of the flower, I used my gold e-bead.
8: Put the bead in the middle of the circle and then thread the end of the wire though a flower bead directly opposite the first one you threaded it through to make the flower. This will keep the middle bead in place at the centre of the flower.
9: Repeat steps 4 to 8 to create a pattern of beads and flowers until you have a length you like and that is comfortable for a necklace.
10: Once you have reached your desired length, add the remaining crimp beads to the wire.
11: Add the jump ring to the end of the wire as well.
12: Loop the wire around the jump ring and back through the crimps and beads at the end, then pull the wire tight.
13: Squash the crimps using the flat nose pliers.
14: Trim the excess wire using your cutting pliers.
Now your necklace is finished and ready to wear! Whats colours will you make yours in?
If you love making flowers out of beads, here are some more floral tutorials for you.
