-
Sick of single color jewelry? Make this two-tone chain choker necklace.
This necklace uses two different colored metal chains for a cool two-tone effect.
You’ll need the following tools and materials to make your own two-tone choker necklace:
1: Pliers. You’ll need your round nose and flat nose pliers for this DIY.
2: Two pieces of choker-length chain, one slightly longer than the other. You can check the length by wrapping your chain closely (but loosely) around your neck. I used an antique gold chain and a copper colored chain.
3: Two jump rings.
4: A lobster clasp.
Now follow these steps to make your two-tone choker necklace:
1: Open one of the jump rings.
2: Add one of the chain to the open jump ring.
3: Add the second chain to the jump ring.
4: Close the jump ring.
5: Add the chains in the same order to the other jump ring, make sure that your chains don’t get twisted.
6: Add the lobster clasp to the second open jump ring.
7: Close the jump ring to secure the clasp in place.
Now your two-tone choker necklace is finished and ready to wear!
-
Here’s how to incorporate recycled materials into a glasses chain DIY
Are you interested in incorporating recycled materials in to your DIY jewelry designs? Here’s an idea for you… a glasses chain made with a recycled headphone cord.
You will need the following tools and materials to make your glasses chain:
1: Pliers. You will need your round nose pliers, flat nose pliers and cutting pliers.
2: A piece of cord from an old broken pair of headphones. I used this cord leftover from another project.
3: Beads with holes big enough to fit your cord. I used 10 of these painted wooden beads.
4: Two crimp ends.
5: Two jump rings.
6: Two rubber glasses holders.
Follow these steps to make your glasses chain:
1: Trim excess material from your cord using the cutting pliers.
2: Add the beads to the cord.
3: Fold one of the crimp ends around one end of the cord using the flat nose pliers.
4: Add the second crimp end to the other end of the cord.
5: Attach the glasses holders to each end of the cord using the jump rings.
Now your glasses chain is finished and ready to use. Perfect for windy spring days or for when you’re getting active outside!
Here’s another version I made using some broken apple headphones and some plastic heart shaped beads.
-
These Pom Pom hoop earrings are the CUTEST!
Here’s a quick tutorial that shows you all the steps to make a pair of adorable and colorful pom pom hoop earrings. Contains affiliate links.
You will need the following tools and materials to make your pom pom hoop earrings:
1: Small pom poms. I added four to each earring.
2: Two hoop earrings.
3: A cutting mat.
4: A pointed tool for poking a hole in each pom pom (be careful!)
Follow these steps to make your pom pom hoop earrings:
1: Using your cutting mat, carefully poke a hole in the first pom pom. If you puncture it too close to the edge it will fall off the earring.
2: Carefully slide the punctured pom pom onto the hoop earring.
3: Continue puncturing 3 more pom poms and put them on the first earring.
4: Repeat steps 1-3 for the remaining 4 pom poms and the second hoop earring.
Now your earrings are finished! How adorable are these fuzzy rainbow hoops?!
Here’s another pair made with matching pom poms.
-
Chunky chains are taking over. Here’s a DIY to get you in on the trend.
Apparently chunky chains are taking over from dainty delicate jewelry. Getting in on this cool new trend is super easy… here’s how to make your own chunky chain necklace.
You will need the following tools and materials to make your chunky chain necklace:
1: Pliers. You’ll need your round nose and flat nose pliers.
2: A chunky chain long in a length of your choice. I used this lightweight silver chain and made it choker length (fitting closely around the neck).
3: Two jump rings.
4: A lobster clasp.
Follow these steps to make your chunky chain necklace:
1: Add one of the jump rings to one end of the chain. Close it to secure it in place.
2: Add the other jump ring to the other end of the necklace.
3: Add the lobster clasp to the open jump ring.
4: Close the jump ring to secure the clasp in place and finish your necklace.
IT IS THAT SIMPLE! Now your chunky chain necklace is ready to wear!
