-
Got a ring that doesn’t fit anymore? Turn it into a fun pendant!
I popped this ring on the other day… and it got stuck on my finger! After panicking a little I managed to get it off and decided it needed a new life as a pendant rather than a ring. Here’s how to transform your too small ring into a cool necklace pendant…
This tutorial contains affiliate links.
You’ll need the following tools and materials:
1: A ring that doesn’t fit you anymore. I used this steel ring.
Here’s something similar:
2: Pliers. I used my cutting pliers, round nose pliers and flat nose pliers.
3: Some tiger tail wire, long enough to make a necklace.
4: Four crimp beads.
5: Two small jump rings.
6: A lobster clasp.
7: Beads. I used this mix of pastel glass seed beads. I also used six larger beads to fit over the folded tiger tail wire.
Follow these steps to make your ring pendant necklace:
1: Add two of the crimp beads and a jump ring to one end of the tiger tail wire.
2: Loop the end of the wire around the jump ring and back through the crimp beads, pull the wire tight.
3: Squash the crimp beads using the flat nose pliers.
4: Bead the wire in any pattern you wish. I beaded mine randomly with no particular pattern.
5: Once you have your necklace at the length you want it, add the remaining crimp beads and jump ring.
6: Loop the end of the wire around the second jump ring and back through the crimp beads and the last few glass beads, pull it tight.
7: Squash the crimps using the flat nose pliers and then trim the excess tiger tail wire using the cutting pliers.
8: Add the ring to the strand.
9: Attach a lobster clasp to one of the end jump rings to finish it off.
Now your ring pendant necklace is finished and ready to wear!
Here’s another idea, pop your rings onto a chain. Here’s one I made with two brass rings on a silver-tone chain.
Here are some other ways to use rings in your jewellery:
- How to turn a ring into the central feature of a choker necklace
- Here’s how to turn a costume ring into a different kind of pendant
This tutorial contains affiliate links.
-
Here’s another way you can use memory wire to make jewelry…
Did you like our D-shaped earrings tutorial? Well here is how you can use a similar technique to make a beaded D-shaped pendant. This design includes a beaded chain accent as well. I really like this design and have made a few versions of it! Maybe you’ve seen some on my Instagram, @hfgjewelsbalmain ?
This tutorial contains affiliate links.
You’ll need these tools and materials to make this D-shaped beaded pendant necklace:
1: Pliers. I used cutting pliers, flat nose pliers and round nose pliers.
2: Half a coil of bracelet length memory wire.
3: One long eye pin.
4: Two pieces of chain.
5: A lobster clasp.
6: Six small eye pins.
7: A couple of jump rings.
8: Beads. I used six shiny blue plastic beads and a selection of pastel-tone glass seed beads.
Now here are all the steps to follow to make your D-shaped beaded pendant:
1: Add the blue beads to each of the small eye pins.
2: Create loops at the top of each pin to secure the beads in place.
3: Attach three of the bead charms together to form a short chain.
4: Repeat for the remaining three charms so that you have two small chains.
5: Set the bead chains aside.
6: Create a loop at one end of the memory wire.
7: Add the beads to the memory wire until there is only 1cm left without beads.
8: Create another loop at the other end of the memory wire to secure the beads on.
9: Add beads to the long eye pin and create a loop at the other end as you did with the memory wire.
10: Attach either end of the long eye pin to the loops at the end of the memory wire to form the D shape.
11: Attach each of the bead chains to either side of the D charm.
12: Attach a piece of chain to each of the bead chains to form the full length necklace chain.
13: Attach a lobster clasp to one side of the necklace using one of the jump rings.
14: Attach the other jump ring to finish the necklace.
Now it is finished and ready to wear! How will you customise this design?
Here are some other versions I have made:
This tutorial contains affiliate links.
-
Crystals are Classic… here’s how to make a crystal necklace.
This crystal necklace is a classic piece that you can wear alone or layer with other pieces.
You will need the following tools and materials to make your crystal necklace:
1: Pliers. You will need your round nose pliers, flat nose pliers and cutting pliers.
2: Two pieces of chain long enough to form a necklace.
3: Four jump rings.
4: One eye pin.
5: A lobster clasp.
6: A crystal bead. I used this crystal bead with a metallic coating on it.
Follow these steps to make your crystal necklace:
1: Add the bead to the eye pin.
2: Trim the eye pin using the cutting pliers.
3: Create a loop at the end of the wire using the round nose pliers to secure the crystal bead on to the pin.
4: Attach one of the chains to one side of the crystal using one of the jump rings.
5: Attach the other chain to the other side of the crystal with another jump ring.
6: Add a jump ring to one of the ends of the chains and attach the lobster clasp.
7: Add the other jump ring to the other side of the necklace to finish it off.
Now your crystal necklace is finished! How will you style yours?
-
Here’s another cute way to upcycle your broken headphones, a double strand necklace!
If you aren’t sick of my headphone recycling tutorials yet here is another way you can upcycle them into beautiful jewelry. This one gives you all the steps you need to take to make a double strand headphone necklace.
You will need the following tools and materials to make your double strand headphone necklace:
1: Pliers. You’ll need cutting pliers, flat nose pliers and round nose pliers
2: A pair of broken headphones. I used the top part of the headphones that I used in the finger knit bracelet tutorial.
3: Four crimp ends.
4: Four small pieces of chain, one pair longer than the other. My headphone cords weren’t quite long enough to fit around my neck so I added some small pieces of chain to the end of each to make them fit.
5: Two beads. I used these chunky wooden beads with big holes.
6: Four larger jump rings.
7: Four smaller jump rings.
8: A lobster clasp.
Follow these steps to make your double strand necklace out of recycled headphones.
1: Cut the headphone cords using the cutting pliers to separate them and remove the ear buds.
2: Add a crimp end to either end of the headphone cords, folding them in place using your flat nose pliers.
3: Add one pair of chains to either end of one of the cords using two of the larger jump rings.
4: Add the second pair of chains to the other cord using another pair of larger jump rings.
5: Add the beads to each of the strands.
7: Secure the chains together using a smaller jump ring on either side of the necklace.
8: Attach the clasp using another smaller jump ring.
9: Add the remaining jump ring to the other side of the necklace to finish it.
Now your double strand necklace made from recycled headphones is finished! I love coming up with creative ways to save broken products from the trash.
