-
Here’s how to make a really cute charm anklet!
Do you love the look of dangling charms? Why not drape some around your ankle with this beaded charm anklet design? This tutorial contains affiliate links.
Here are the tools and materials I used to make my beaded charm anklet:
1: Pliers. I used by round nose pliers (middle), flat nose pliers (right) and cutting pliers (left).
2: A selection of beads. I used some polymer clay beads that I made a while ago, some green glass beads and some gold e-beads.
3: Some chain long enough to fit around your ankle.
4: Two jump rings.
5: A lobster clasp.
6: A bunch of head pins.
Follow these steps to make your charm anklet:
1: Add beads to each of the head pins.
2: Bend each head pin to form a right angle.
3: Trim the excess pin using the cutting pliers. Leave approximately 1cm unbeaded on all the charms.
4: Loop the top of the pin using the round nose pliers to secure the beads in place.
5: Add a jump ring to either end of the anklet chain and attach the lobster clasp to one of them.
6: Now you can attach the charms. Do this by opening the top loop slightly and sliding it through the chain links at spacing of your choice.
Now your charm anklet is finished and ready to wear! So fun!
This tutorial contains affiliate links.
-
Anklets are the coolest!!!!! Here’s how to make a simple chain charm anklet.
This anklet is super simple in design, add a cute charm to a plain chain and you’re ready to go! What kind of charms will you put on your DIY anklet? This tutorial contains affiliate links.
You’ll need the following tools and materials to make your simple chain charm anklet:
1: Some pliers. Use your flat nose and round nose pliers.
2: A piece of chain long enough to fit your ankle.
3: Two jump rings.
4: A lobster clasp.
5: Another jump ring.
6: A charm of your choice. I used an enamel peach charm.
Follow these steps to make your simple charm anklet:
1: Add a jump ring to one end of the chain.
2: Add the lobster clasp to the open jump ring. Close the jump ring to keep the clasp in place.
3: Add another jump ring to the other side of the anklet.
4: Add the remaining jump ring to the top of the charm.
5: Attach the charm to the jump ring that attaches the clasp to the chain.
6: Close the charm jump ring to secure the charm in place and finish off your anklet.
Now it is ready to wear! How cute is this little peach charm anklet? I am really into food and fruit themed jewelry at the moment 🙂
This tutorial contains affiliate links.
-
Anklets are awesome. Here’s how to make a double strand anklet.
Anklets are the jewelry accessory for the summer, here’s how to make a different version with two chain strands. Contains affiliate links.
You will need the following tools and materials to make your double strand anklet:
1: Pliers. You need your round nose pliers and flat nose pliers to make this anklet.
2: Two pieces of chain long enough to fit your ankle comfortably. I used two different shaped chains in the same color.
3: Two jump rings.
4: A lobster clasp.
Follow these steps to make your double strand anklet:
1: Open one of the jump rings and slide it on to the end of both chains.
2: Close the jump ring to secure the chains together.
3: Add the other jump ring to the other side of the chain.
4: Add the lobster clasp to the open jump ring.
5: Close the jump ring to secure the clasp in place.
Now your double strand anklet is finished! So cool!
-
Combine the latest trends in one awesome design with this pearl anklet!
Pearls and anklets are having a moment right now. Hop in on the trend with this rainbow pearl beaded anklet. Contains affiliate links.
You’ll need the following tools and materials to make your pearl anklet:
1: Pliers. You’ll need cutting pliers, flat nose pliers and round nose pliers to make your anklet.
2: Tiger tail wire. Cut it a little longer than the length you want to make your anklet.
3: Four crimp beads.
4: Two jump rings.
5: A lobster clasp.
6: Pearl beads. I used three pink freshwater pearls.
7: Mixed beads. I used a mix of bugle and seed beads.
Follow these steps to make your pearl anklet:
1: Add two crimp beads to one end of the wire.
2: Add a jump ring.
3: Loop the wire around the jump ring and through the crimp beads.
4: Squash the jump rings using the flat nose pliers.
5: Add your beads. I added mine in a pattern with the pearls situated close to one side of the anklet.
6: Once your anklet is fully beaded add the remaining crimp beads.
7: Add the second jump ring.
8: Loop the end of the wire around the jump ring and through the crimp beads and the end few glass beads.
9: Pull the wire tight.
10: Squash the crimps using the flat nose pliers.
11: Trim the excess tiger tail wire.
12: Add the clasp to one side of the anklet. Close the jump ring to secure it in place.
Now your pearl anklet is finished and ready for a summer #ankleparty.
