-
Here’s how to make a sweet daisy chain necklace using tiger tail wire!
Daisy chains are a classic beaded jewellery technique, and they look amazing! Here’s how to make one using some tiger tail wire and a selection of glass beads. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this daisy chain necklace:
1: A length of tiger tail wire, you’ll need quite a lot as the daisy chain technique uses some extra wire. I cut mine about 4x the length I wanted for my necklace, approximately 1.5m long. I suggest using your best guess rather than taking an exact measurement.
2: Some beads. I used a variety of glass beads including recycled orange e-beads, some gold tone beads and some blue seed beads.
Blue seed beads: https://amzn.to/3S8agp8
3: Four crimp beads.
4: A clasp and jump ring. I used a gold-filled parrot clasp.
5: Pliers. I used cutting pliers, round nose pliers and cutting pliers to finish my necklace.
Follow these steps to make your beaded daisy chain necklace:
1: Add two crimp beads and the clasp to the end of the wire.
2: Fold the wire around the clasp and back through the crimps.
3: Squash the crimp beads to secure the clasp to the end of the wire.
4: Begin adding beads. I made mine a pattern of blue beads and orange flowers so started by adding 15 blue seed beads.
5: Add six beads for your first flower.
6: Take the end of the wire and thread it through the first flower bead to form a circle shape.
7: Pull the wire tight and add another bead to make the centre of the flower, I used my gold e-bead.
8: Put the bead in the middle of the circle and then thread the end of the wire though a flower bead directly opposite the first one you threaded it through to make the flower. This will keep the middle bead in place at the centre of the flower.
9: Repeat steps 4 to 8 to create a pattern of beads and flowers until you have a length you like and that is comfortable for a necklace.
10: Once you have reached your desired length, add the remaining crimp beads to the wire.
11: Add the jump ring to the end of the wire as well.
12: Loop the wire around the jump ring and back through the crimps and beads at the end, then pull the wire tight.
13: Squash the crimps using the flat nose pliers.
14: Trim the excess wire using your cutting pliers.
Now your necklace is finished and ready to wear! Whats colours will you make yours in?
If you love making flowers out of beads, here are some more floral tutorials for you.
-
Need a new necklace? Look no further than this tutorial!
Here’s a new necklace you can make and customise to your liking. It uses memory wire and chain to make a layered effect for extra visual interest.
Here’s what you need to make this necklace:
1: Pliers. I used my cutting pliers, round nose pliers and flat nose pliers.
2: Two half circle pieces of necklace length memory wire.
3: Two pieces of chain that, when measured together, are long enough to fit around your neck.
4: Six jump rings.
5: A lobster clasp.
6: Beads. I used yellow glass beads.
Follow these steps to make your necklace:
1: Curl one end of one of the pieces of memory wire using the round nose pliers to form a loop.
2: Add beads to the wire until there is approximately 1cm left unbeaded.
3: Curl the other end of the wire using the round nose pliers again to secure the beads in place.
4: Repeat steps 1 to 3 for the second piece of memory wire.
5: Attach the two pieces of memory wire together using two of the jump rings.
6: Attach one of the pieces of chain to one side of the memory wire arches using another of the jump rings.
7: Repeat step six for the other side of the necklace attaching the second piece of chain.
8: Attach the lobster clasp to one side of the necklace using one of the remaining two jump rings.
9: Attach the last jump ring to the other side of the necklace to finish it off.
Now your new necklace is ready to wear!
-
How to make a double-strand knot necklace.
This one didn’t really turn out how I had anticipated, but I thought I would share it with you anyway. I had more success making two beaded strands to knot together compared to this design that knots together a beaded strand with a chunky chain. If you don’t want the chain just make one bead strand and knot it loosely in the middle for a cool knot necklace look! This tutorial contains affiliate links.
You’ll need the following tools and materials to make your double-strand knot necklace:
1: Tiger tail wire. Make it a little longer than the chain you are using.
2: Four crimp beads.
3: Pliers. I used cutting, flat-nose and round-nose pliers.
4: A length of chunky chain.
5: Two jump rings.
6: A lobster clasp.
7: Beads. I used some blue plastic beads and some green glass beads.
Follow these steps to make your two-strand knot necklace.
1: Add the crimps to one end of the tiger tail wire.
2: Add the jump ring and loop the end of the wire around it and back through the crimp beads.
3: Squash the crimp beads using the flat nose pliers.
4: Begin adding the beads in your chosen pattern.
5: Bead until it is at your desired length.
6: Add the second pair of crimp beads to the wire and repeat steps 2 and 3 to secure the beads onto the strand.
7: Trim the excess wire using the cutting pliers.
8: Add the chain to the bead strand by opening the jump rings at either end of the necklace and adding the ends of the chain.
9: Add a lobster clasp to the necklace.
10: Tie the strands into a loose knot that sits at the centre of the necklace opposite the lobster clasp closure.
Now your necklace is finished and ready to wear! Like I said, the chain looks a bit weird on this one, so you can leave it out if you like. You could also make the double strand necklace and skip the knot!
You can make this necklace with materials you already have, but if you need some new supplies this tutorial contains affiliate links.
-
Here’s another way you can use memory wire to make jewelry…
Did you like our D-shaped earrings tutorial? Well here is how you can use a similar technique to make a beaded D-shaped pendant. This design includes a beaded chain accent as well. I really like this design and have made a few versions of it! Maybe you’ve seen some on my Instagram, @hfgjewelsbalmain ?
This tutorial contains affiliate links.
You’ll need these tools and materials to make this D-shaped beaded pendant necklace:
1: Pliers. I used cutting pliers, flat nose pliers and round nose pliers.
2: Half a coil of bracelet length memory wire.
3: One long eye pin.
4: Two pieces of chain.
5: A lobster clasp.
6: Six small eye pins.
7: A couple of jump rings.
8: Beads. I used six shiny blue plastic beads and a selection of pastel-tone glass seed beads.
Now here are all the steps to follow to make your D-shaped beaded pendant:
1: Add the blue beads to each of the small eye pins.
2: Create loops at the top of each pin to secure the beads in place.
3: Attach three of the bead charms together to form a short chain.
4: Repeat for the remaining three charms so that you have two small chains.
5: Set the bead chains aside.
6: Create a loop at one end of the memory wire.
7: Add the beads to the memory wire until there is only 1cm left without beads.
8: Create another loop at the other end of the memory wire to secure the beads on.
9: Add beads to the long eye pin and create a loop at the other end as you did with the memory wire.
10: Attach either end of the long eye pin to the loops at the end of the memory wire to form the D shape.
11: Attach each of the bead chains to either side of the D charm.
12: Attach a piece of chain to each of the bead chains to form the full length necklace chain.
13: Attach a lobster clasp to one side of the necklace using one of the jump rings.
14: Attach the other jump ring to finish the necklace.
Now it is finished and ready to wear! How will you customise this design?
Here are some other versions I have made:
This tutorial contains affiliate links.
-
Do you need more colorful jewelry in your life? Why not make this rainbow beaded choker with a feature pendant?
This choker necklace is super cool! Made with a rainbow of glass beads and a simple charm, it is sure to make an impact!
You will need the following tools and materials to make this choker necklace:
1: Pliers. You’ll need your flat nose pliers, round nose pliers and cutting pliers for this necklace.
2: Some tiger tail wire long enough to make a choker. Measure the length by wrapping the wire loosely around your neck. Make sure you leave enough length to allow space for securing the ends.
3: Four crimp beads.
4: Two small jump rings.
5: One bigger jump ring.
6: A lobster clasp.
7: Beads. I used these mixed glass beads in different colours.
8: A pendant. I used this pendant I made a while ago from a ring. Check out this tutorial to do this yourself.
Follow these steps to make your own colorful choker necklace:
1: Add two of the crimp beads to the end of the wire.
2: Fold the end of the wire around a jump ring and thread it back through the crimp beads.
3: Squash the crimp beads using the flat nose pliers.
4: Begin adding the beads to the wire. I added mine in random order.
5: Add the pendant. Depending on the size of your beads and the pendant bail you might need to add your pendant at half way so that it sits in the middle of your necklace when you wear it.
6: Add the remaining crimp beads and small jump ring to the end of the wire.
7: Fold the wire around the jump ring and thread it through the crimps and end beads.
8: Squash the crimp beads.
9: Trim the excess wire.
10: Add the lobster clasp to one end of the necklace, attaching it using one of the jump rings.
11: Add the larger jump ring to the other side of the necklace to finish it off.
Now your joyful beaded choker is ready to wear!
