-
Here’s how to make a really cute charm anklet!
Do you love the look of dangling charms? Why not drape some around your ankle with this beaded charm anklet design? This tutorial contains affiliate links.
Here are the tools and materials I used to make my beaded charm anklet:
1: Pliers. I used by round nose pliers (middle), flat nose pliers (right) and cutting pliers (left).
2: A selection of beads. I used some polymer clay beads that I made a while ago, some green glass beads and some gold e-beads.
3: Some chain long enough to fit around your ankle.
4: Two jump rings.
5: A lobster clasp.
6: A bunch of head pins.
Follow these steps to make your charm anklet:
1: Add beads to each of the head pins.
2: Bend each head pin to form a right angle.
3: Trim the excess pin using the cutting pliers. Leave approximately 1cm unbeaded on all the charms.
4: Loop the top of the pin using the round nose pliers to secure the beads in place.
5: Add a jump ring to either end of the anklet chain and attach the lobster clasp to one of them.
6: Now you can attach the charms. Do this by opening the top loop slightly and sliding it through the chain links at spacing of your choice.
Now your charm anklet is finished and ready to wear! So fun!
This tutorial contains affiliate links.
-
Ankle wear is cool! Here’s how to make a wrap anklet with clip on charms.
This anklet is so cool! It is made from chunky chain that wraps twice around your ankle and has three cute clip on charms. This is sure to keep you busy for a little while, make tonnes of charms so that your ankle feels fancy!
You’ll need the following tools and materials to make your wrap anklet with charms:
1: A length of chain long enough to wrap twice around your ankle.
2: Two medium sized jump rings.
3: A small lobster clasp.
4: Three head pins
5: Three large jump rings.
6: Three large lobster clasps.
7: Beads. I used these resin beads with some green glass beads.
8: Pliers. I used cutting pliers, round nose pliers and flat nose pliers.
Here are the steps to make your wrap anklet with clip on charms:
1: Add jump rings to either side of the length of chain.
2: Before closing one of the jump rings add the small lobster clasp. You can set the chain aside for a moment at this stage.
3: Add the beads to each of the head pins.
4: Bend the pins at a right angle and trim them so that there is only approximately 1cm exposed.
5: Loop the tops of each pin using the round nose pliers to secure the beads on the pins.
7: Add a jump ring to each charm.
8: Attach each of the charms to each of the large lobster clasps and secure them by closing the jump ring.
9: Attach the charms to the chain wherever you choose. Now your anklet is finished!
Here’s what the finished product looks like on.
This tutorial contains affiliate links.
We have lots of other anklet DIYs you can follow if you want to shine up your ankle game:
- This fully beaded charm anklet
- Simple chain anklets that feature cool tube beads
- Chain anklets with cute charms
- A Gemstone embellished chain anklet
- Why not make a leather and bead charm anklet?
- Braid up this string and bead anklet
- Double chains for this anklet
- Recycle broken headphones to make this anklet
- Here’s how to add shell charms to a chain anklet
- Love charm connectors? Add one to a delicate anklet
- Construct a beaded chain anklet
- Add some fun to your ankle with this pearl beaded anklet
- Finger knit this bohemian shell anklet
- Use recycled shopping bag cords to make this anklet
-
Anklets are the coolest!!!!! Here’s how to make a simple chain charm anklet.
This anklet is super simple in design, add a cute charm to a plain chain and you’re ready to go! What kind of charms will you put on your DIY anklet? This tutorial contains affiliate links.
You’ll need the following tools and materials to make your simple chain charm anklet:
1: Some pliers. Use your flat nose and round nose pliers.
2: A piece of chain long enough to fit your ankle.
3: Two jump rings.
4: A lobster clasp.
5: Another jump ring.
6: A charm of your choice. I used an enamel peach charm.
Follow these steps to make your simple charm anklet:
1: Add a jump ring to one end of the chain.
2: Add the lobster clasp to the open jump ring. Close the jump ring to keep the clasp in place.
3: Add another jump ring to the other side of the anklet.
4: Add the remaining jump ring to the top of the charm.
5: Attach the charm to the jump ring that attaches the clasp to the chain.
6: Close the charm jump ring to secure the charm in place and finish off your anklet.
Now it is ready to wear! How cute is this little peach charm anklet? I am really into food and fruit themed jewelry at the moment 🙂
This tutorial contains affiliate links.
