-
How to make a smiley good vibes necklace!
This necklace has been designed to give you some good vibes, it features a yellow polymer clay smiley bead and a black tourmaline for good feelings! Black tourmaline is believed to be a gemstone that protects people against negative energies. So by that logic, this necklace will save you from negative vibes and send a smile to people around you! Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your good vibes necklace:
1: A chain necklace thin enough to fit the bead.
2: Pliers to remove and replace the end of the chain.
3: A smiley face polymer clay bead.
4: A black tourmaline bead.
5: A large jump ring.
Here’s how to put your necklace for positivity together:
1: Remove the jump ring or tag at the end of the necklace using your pliers.
2: Slide the bead onto the chain.
3: Add the tourmaline bead onto the jump ring.
4: Close the jump ring using your pliers.
5: Add the tourmaline charm to the necklace.
6: Replace the jump ring or tag to the end of the chain to finish the necklace off.
Now your super cute smiley good vibes necklace is finished and ready to wear!
-
Here’s how to make a stunning crystal choker necklace!
This choker length necklace is really special! It’s simple look is a really powerful way to show off your special crystal beads. I used a small green crystal bead for my design. Please note that this tutorial contains affiliate links.
Grab these tools and materials to make your special crystal choker:
1: A pretty crystal bead. I used this green bead.
2: A short eye pin.
3: Four small jump rings.
4: Two pieces of chain that are long enough in total to fit closely around your neck.
5: A lobster clasp.
6: Some pliers. I used my round nose and flat nose pliers to make this necklace.
Follow these steps to make your pretty crystal choker necklace:
1: Add the crystal bead to the eye pin.
2: Bend the pin to form an angle.
3: Secure the bead onto the pin using the round nose pliers to make a loop.
4: Attach one side of the chain to one side of the charm using one of the small jump rings.
5: Repeat step 4 for the other side of the necklace attaching the other side of the chain to the other side of the crystal charm.
6: Attach the lobster clasp to the end of one of the chains using another of the small jump rings.
7: Attach the remaining jump ring to the other side of the necklace to finish it off.
Now your lovely crystal chain choker is finished and ready to wear! Let it stand out on its own or layer with some longer pieces. Perfect for hot girl summer!
Here are some other crystal designs you can make at home:
-
How to make a pair of crystal earrings.
These earrings are so cute! Made with some dyed jasper crystals, they are sure to make a summer statement.
You will need the following tools and materials to make your crystal earrings:
1: Pliers. You will need your round nose pliers, flat nose pliers and cutting pliers to make these earrings.
2: Two earring hooks.
3: Two small pieces of chain.
3: Two eye pins.
4: Two small jump rings.
5: Beads of your choice. I used these blue dyed jasper crystal beads and four clear glass beads.
Follow these steps to make your crystal earrings:
1: Add the beads to each of the eye pins.
2: Create loops at the end of each pin to secure the beads in place using the round nose pliers. Trim the wires if necessary to make sure that the loops aren’t too large.
3: Attach each of the small chains to each of the bead charms, securing each end of the chain to either side of the bead charm.
4: Add a small jump ring to the middle of the chain and attach the earring hook. Repeat this for the second earring to finish them off.
Now your amazing boho crystal earrings are finished and ready to wear! Will these be your summer statement earrings?
-
Crystals are Classic… here’s how to make a crystal necklace.
This crystal necklace is a classic piece that you can wear alone or layer with other pieces.
You will need the following tools and materials to make your crystal necklace:
1: Pliers. You will need your round nose pliers, flat nose pliers and cutting pliers.
2: Two pieces of chain long enough to form a necklace.
3: Four jump rings.
4: One eye pin.
5: A lobster clasp.
6: A crystal bead. I used this crystal bead with a metallic coating on it.
Follow these steps to make your crystal necklace:
1: Add the bead to the eye pin.
2: Trim the eye pin using the cutting pliers.
3: Create a loop at the end of the wire using the round nose pliers to secure the crystal bead on to the pin.
4: Attach one of the chains to one side of the crystal using one of the jump rings.
5: Attach the other chain to the other side of the crystal with another jump ring.
6: Add a jump ring to one of the ends of the chains and attach the lobster clasp.
7: Add the other jump ring to the other side of the necklace to finish it off.
Now your crystal necklace is finished! How will you style yours?
-
How to make Crystal chain back earrings… these are AMAZING!
Remember these earrings? Here’s another version that packs a crystal laden punch. Contains affiliate links.
You will need the following tools and materials to make these earrings:
1: Pliers. You’ll need your flat nose pliers and round nose pliers.
2: Two charm connector studs with butterfly backs.
3: Two jump rings.
4: 16 eye pins.
5: 16 crystal chip beads. I used some rutilated quartz beads.
Follow these steps to make your crystal chain back earrings:
1: Add a bead to each of the eye pins.
2: Loop the end of each eye pin using the round nose pliers to secure the beads in place.
3: Separate the charms.
4: Attach eight of the charms together to form a chain.
5: Repeat step 4 for the remaining crystal charms.
6: Attach an earring to one of the chains.
7: Repeat step 6 for the second chain.
8: Add the end of the chain to the butterfly back using one of the jump rings.
9: Repeat step 8 for the second earring.
Now your earrings are finished and ready to wear! So cool!
-
Gaudy crystals are in! Here’s how to make some bold crystal earrings.
These crystal earrings pack a visual punch! Perfect for spicing up your go to outfit. This tutorial contains affiliate links.
You will need the following tools and materials to make these rhinestone crystal earrings.
1: Two strands of rhinestone crystals. I made mine approximately 12cm long.
2: Two larger rhinestones.
3: Two glue on stud earrings with backs.
4: Araldite glue
5: A skewer.
6: Scrap Paper.
Follow these steps to make your rhinestone crystal earrings:
1: Squeeze the Araldite glue out into equal parts and mix it on the paper.
2: Add the glue to the edge of the first large rhinestone.
3: Drape one of the rhinestone strands around the rhinestone and set it aside to dry. I recommend placing them on a cutting mat so that you don’t get paper stuck on your earrings.
4: Repeat steps 2 and 3 for the second set of rhinestones.
5: Add more glue to the earrings and place them on the back of the large rhinestones.
Once your earrings are dry they’re ready to wear! How perfect are these?
Here’s another pair I made using shorter pieces of rhinestone chain.
-
Last Minute Handmade Gifts for Christmas 2018!
Have you left your gifts to the last minute? Why not make your friends and family some special accessories? Here are five DIY Christmas gift ideas.
A Festive Headband.
Headbands are back! This headband design uses some luxurious ribbon for a cool effect. Find all the steps here.
Collar clips for your stylish friend with all the flair!
These collar clips make clever use of clip on earrings. They’re perfect for people who love quirky accessories. Find out how to make them here.
For the person who likes to keep it simple: curved threader earrings.
These earrings look so delicate and elegant! Make your own by following this tutorial.
For the crystal lover: a leather and crystal choker.
This choker design is perfect for showing off those protective crystals. Find all the steps here.
Here’s something for the sentimental: Earrings made with found feathers.
I made these earrings using feathers I found myself. Using found materials can make your designs extra special for the people who receive them. Here’s how to make these feather earrings.
-
Need something tough but healing? Make this crystal choker necklace!
Do you need a cute new accessory to jazz up your jewelry collection? Make this awesome crystal choker necklace.
You will need the following tools and materials to make your crystal choker necklace:
1: Pliers. You will need your cutting pliers, flat nose pliers and round nose pliers.
2: A long eye pin.
3: Gemstone beads. I used these smoky quartz beads.
4: Two pieces of leather cord. Approximately 15.5 cm long.
5: Four leather crimp ends.
6: Two jump rings.
7: A lobster clasp.
Follow these steps to make your crystal choker:
1: Add the beads to the eye pin.
2: Bend the end of the pin to form a right angle using the round nose pliers.
3: Create a loop at the end of the pin using the round nose pliers. This will secure the beads on the pin.
4: Add each of the crimp ends to the ends of the leather. Fold each side of the crimps around the leather using the flat nose pliers.
5: Attach a piece of leather to each side of the crystal beaded pin.
6: Add a lobster clasp to one side of the necklace using one of the jump rings.
7: Add the remaining jump ring to the other side of the necklace to finish your necklace.
Now it’s ready to wear… a perfect combination of tough and whimsical!
