googlea7fe66ce5e35c83b.html gtag('config', 'UA-139427764-1')
How to Make Earrings,  Step-By-Step Tutorials

How to Make Chain Back Earrings AKA The Prettiest Earrings Out

These earrings didn’t turn out quite how I had hoped but I’m still pretty excited about these asymmetrical chain-back drop earrings. These simple earrings are made using charm connector earrings and a simple piece of chain that is attached to the butterfly back of the earrings. Add your choice of beads to make these special earrings your own. I used a pair of stunning green fire agate beads.

You will need the following tools and materials to make these chain back earrings:

1: Pliers. You will need round nose pliers, flat nose pliers and round nose pliers to make these earrings.

pliers

2: Two charm connector stud earrings.

charm connector earrings

3: One head pin.

head pin

4: One eye pin.

eye pin

5: Two jump rings.

jump rings

6: Two pieces of chain. The pieces I used already had jump rings attached, however, depending on the chain you use you might need some extra jump rings.

pieces of chain

7: Two feature beads. I used these green fire agate beads.

agate beads

The Steps:

1: Add one bead to the eye pin.

bead on head pin

2: Use the round nose pliers to make a loop at the other end of the pin, securing the bead in place.

bending pin

bead on pin

3: Add the other bead to the head pin.

adding bead to head pin

4: Bend the pin at a right angle to the bead using the round nose pliers.

bending long pin

5: Trim the pin using the cutting pliers.

trimming pin

6: Create a loop with the end of the pin using the round nose pliers.

curling end of pin

7: Now you both of your bead charms are complete.

two complete charms

8: Take the double looped charm and attach it to one of the earring studs. Make sure you close the loop again to secure the earring in place.

attaching earring to charm

9: Add a piece of chain to the other end of the charm.

attach chain to bottom of charm

10: Slide an open jump ring into a loop of a butterfly earring back.

attaching jump ring to earring back

11: Slide the end of the chain into the same jump ring. Close the jump ring using pliers.

attach chain to jump ring

12: Now one of your earrings is complete.

holding earring

13: Take the other bead and attach it to the end of the second chain. Close the bead charm loop using your pliers.

attaching head charm

14: Attach a jump ring to the middle of the chain.

adding jump ring to middle of charm

15: Slide the earring charm onto the open jump ring and then close it using pliers.

attaching charm to earring

16: Now your second earring is complete!

completed earring

17: Now your earring set is complete. Head out and wear your new earrings with flair!

chain drop earrings

Welcome to DIY Jewelry Hub. If you’ve ever wanted to learn how to make your own jewelry this is the place to start! Jewelry is a great way to show off your individuality and style. You’ll be surprised at how easy it is to create your own unique pieces! DIY Jewelry Hub will equip you with all the knowledge and inspiration you need to make your own jewelry.

Leave a Reply

Your email address will not be published. Required fields are marked *

This website uses Google Analytics software. You can opt out via this link. Click here to opt-out.