-
Combine gold wire and pearls with these amazing statement earrings
These earrings use different materials to create a loop of gold wire and rainbow beads with a sweet dangly pearl in the centre. This tutorial contains affiliate links.
You’ll need the following tools and materials to make your earrings:
1: Pliers. I used my cutting pliers (left), flat nose pliers (right) and round nose pliers (middle).
2: Two pieces of 0.8mm wire approximately 7-10cm long. I used gold fill wire.
3: Two pieces of tiger tail wire, around 10-15cm long.
4: Four small jump rings.
5: Two head pins.
6: Two larger jump rings.
7: Post earrings with charm loops.
8: Beads. I used mixed glass beads.
9: Two pearl beads.
10: Eight crimp beads.
11: Something round to form your wires around. I used a bead container.
Follow these steps to make your earrings:
1: Take one of the pieces of tiger tail wire and add two crimp beads and a small jump ring to the end.
2: Loop the end of the wire around the jump ring and through the crimp beads. Pull it tight.
3: Squash the crimps using flat nose pliers.
4: Add beads to the tiger tail wire until you have a length you like.
5: Once fully beaded add another two crimp beads and another small jump ring to the end of the wire.
6: Pull the end of the wire around the jump ring and back through the crimps and last few beads.
7: Squash the crimp beads at the end and trim the excess wire.
8: Repeat steps 1 to 8 for the second bead strand.
9: Add each of the pearl beads to the head pins and use round nose pliers to curl the tops, this secures the beads on to the pins.
10: Add the pearls to each beaded strand.
11: Bend the wires around your round thing to form an arch shape.
12: Add a loop to either end of the wire using the round nose pliers.
13: Attach a bead strand to each of the wires using the jump rings.
14: Add an earring post to each earring, attaching it using the remaining two larger jump rings.
Now your earrings are finished and ready to put on! Perfect for adding some color to neutral outfits!
-
I really love this design! Make your own gemstone arch earrings.
These arch earrings are really really cool! You make them by hammering some pretty wire and add your fave gemstones to make your own version. I used some cute pink rhodonite gemstone chip beads, what kind of beads will you use? This tutorial contains affiliate links.
Here are the tools and materials I used to make my gemstone arch earrings:
1: Pliers. I used cutting pliers for this design. I also used flat nose and round nose pliers on the jump rings.
2: Two pieces of wire. I used some gold-filled wire, approximately 8cm long.
3: A file or sandpaper for getting rid of the rough edges of the wire.
4: A hammering block.
5: A hammer. I used a normal hammer but a jewelry specific hammer might be better ;).
6: Earring findings. I used these gold-tone stud earrings.
7: Two jump rings.
8: Beads. As mentioned before, I used eight rhodonite gemstone chip beads.
9: Something round to bend your wires around. I used a permanent marker.
Follow these steps to make your own wire arch earrings:
1: Hammer one end of each of the wires. Hammer on the steel block and hit the wire on both sides so that it becomes wide and flat.
2: Add four beads to each of the wires.
3: Push the beads to the hammered ends of the wires.
4: Hammer the other end of the wires the same way as you did in step 1. Make sure you make the wires wide enough so that your beads don’t slip off.
5: File or sandpaper the ends of the hammered wires so that they aren’t sharp.
6: Take your wires, find the mid point and bend them around the permanent marker to form an arch shape.
7: Add the earrings to each of the arches using the jump rings.
Now your arch earrings are finished!
Here’s another pair I made with some round gemstone beads.
Here’s a pendant version with thicker wire and glass beads.
This tutorial contains affiliate links.
-
Here’s how to make some cute studs out of some wire!
These tiny studs are made using a hammer and some gold-fill wire, I love them!
You will need the following tools and materials to make your wire stud earrings.
1: Two short pieces of wire. I used some rose-gold fill wire.
2: A steel block.
3: A hammer.
4: Some plastic nose pliers for bending the wire.
5: A file.
Follow these steps to make your wire stud earrings:
1: Place the wires on the steel block and hammer one side of each wire flat.
2: File the ends of the wires so that they are smooth.
3: Fold the wires around the pliers. Make sure you leave the posts long enough to fit in your lobes. I had to adjust mine a little bit after I took this photo.
4: Add the earring backs and now you’re done! How cute are these little guys?
Here’s another pair I made using thicker gold-fill wire.
