-
How to make a beaded necklace with cute little bead charms!
This is a cute little piece that looks great layered with chains! Use some fun gemstone beads to add some pizazz to your design. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this necklace:
1: Some tiger tail wire long enough to fit around your neck, plus some extra.
2: A set of pliers. I used my cutting pliers (left), flat nose pliers (right) and round nose pliers (middle).
3: Some glass beads. I used these green glass e-beads.
4: Some statement beads. I used 5 stone beads.
5: Four crimp beads.
6: Two jump rings.
7: Five head pins.
8: A lobster clasp.
Follow these steps to make your beaded charm necklace:
1: Add each of the statement beads to each of the head pins.
2: Curl the tops of each pin using the round nose pliers. This will keep the bead in place.
3: Set the charms aside.
4: Put two of the crimp beads onto the tiger tail wire.
5: Add one of the jump rings.
6: Loop the wire around the jump ring and back through the crimp beads. Pull the wire tight.
7: Squash the crimp beads using the flat nose pliers.
8: Begin adding beads to the wire.
9: Bead until you get to a length you like, before the middle of the wire.
10: Add the first bead charm from the set you made earlier.
11: Add some more glass beads and then add another bead charm.
12: Continue adding charms in your chosen pattern until they are all in place.
13: And now you can add the glass beads until your necklace is at the right length and is beaded evenly so that the bead charms are at the bottom.
14: Add the second pair of crimp beads and the jump ring.
15: Loop the wire around the jump ring and back through the crimps and the last few beads on the strand.
16: You should now pull the wire tight and squash the crimps with the flat nose pliers.
17: Now you can trim the excess wire with cutting pliers.
18: Open one of the jump rings and attach the lobster clasp. Close the ring to secure the clasp in place.
So now your necklace is finished and ready to wear! So so cute. What necklaces will you layer yours with?
Or maybe you’ll wear it as a statement on its own?!
-
How to make cute knotted earrings! These are adorable.
These beaded knot earrings are really pretty! Use any beads you like to form a delightful beaded knot that dangles from each ear. This tutorial is really cool.
You’ll need these tools and materials to make your beaded knot earrings:
1: Pliers. You’ll need your cutting pliers, round nose pliers and flat nose pliers.
2: Two pieces of tigertail wire, a longer wire will give you a tighter knot. I made my pieces approximately 13cm long.
3: Eight crimp beads.
4: Four smaller jump rings.
5: Two larger jump rings.
6: Two earring posts with charm connectors on the bottom.
7: Beads. I used these mixed glass beads.
Follow these steps to make your knot earrings:
1: Add two crimp beads to one end of one of the pieces of tiger tail wire.
2: Add a jump ring to the end of the wire.
3: Fold the end of the wire around the jump ring and through the crimp beads.
4: Squash the crimp beads using the flat nose pliers to secure the end.
5: Add the beads to the wire.
6: Once you have reached the length you like, add another pair of crimp beads and another jump ring to the end of the wire.
7: Loop the end of the wire around the jump ring and back through the crimps and first couple of beads on the end of the wire.
8: Pull the wire tight and squash the crimps to secure the beads.
9: Trim the excess wire.
10: Repeat steps 1-10 for the second wire.
11: Loosely knot both the wires. Don’t try to pull it really tight, you’ll bend the wire out of shape.
12: Attach the ends of the wires together using the two larger jump rings.
13: Attach each of the knots to the earring posts using the same jump rings you used to secure the ends of the knots together.
Now your earrings are finished and ready to wear. Lightweight and beautiful.
Here’s another pair I made using citrine chip beads and yellow glass beads.
-
I’m not sure what to call this design, but it sure is cute! Here’s a new beaded earring tutorial.
These earrings are made from four pieces of bracelet length memory wire, attached together to form an eye shape. These cute earrings can be beaded up in lots of different colors to suit your preference. This tutorial contains affiliate links.
You’ll need the following tools and materials to make your earrings:
1: Pliers. I used my cutting pliers and round nose pliers.
2: Bracelet length memory wire cut into four equal half circle pieces.
3: Earring hooks.
4: Four small jump rings.
5: Two big jump rings.
6: Beads. I used orange and clear glass beads.
Follow these steps to make your new earrings:
1: Curl one end of one of the wires to form a loop using the round nose pliers.
2: Add beads to the wire and leave a 1cm section unbeaded.
3: Use the round nose pliers again to curl the other end of the wire and secure the beads on the wire.
4: Repeat steps 1 to 3 for the remaining three wires, beading two wires in one colour and two in the other.
5: Start attaching the wires together. Take one of the clear beaded wires and one of the orange ones and attach them together using one of the small jump rings.
6: Now attach the other side together to form a squashed circle/eye shape.
7: Repeat steps 6 and 7 for the other earring.
8: Add the earring hooks to each of the beaded eye shapes using the large jump rings. I made mine asymmetrical so that one has an orange top and the other has a clear top.
Now your earrings are finished! How cute is this design?
-
How to make some stud earrings at home out of wire.
These wire earrings are super cute! Hammer some wire flat and then curl the ends to create some adorable little stud earrings that you can stack in multiple piercings.
You’ll need these tools and materials to make these stud earrings:
1: Cutting pliers, flat nose pliers and round nose pliers.
2: A hammer.
3: A steel hammering block.
4: Two small pieces of wire, around 4-5cm long. I used this rose gold filled wire.
5: A file or some sandpaper.
Follow these steps to make your cute little stud earrings.
1: Take the wires and place them on the hammering block.
2: Hammer one end of the wires flat using the hammer. Leave 1cm untouched.
3: Bend the wires at a right angle using the flat nose pliers. Bend at the point where the flat side ends.
4: Curl the flattened ends around the round nose pliers to form a little loop.
5: File or sandpaper the ends of the wires so that they are smooth and comfortable to wear.
6: Pop some butterfly backs onto each earring to finish them off.
Now your cute little curled wire earrings are finished and ready to wear! Super adorable and fun.
-
Do you love body chains? Here’s how to DIY a cool bra body chain!
This body chain is a bit sexy and cool. It uses chains to make the shape of a bikini bra and it looks hot as hell! And if one body chain isn’t enough here are a couple more tutorials you can DIY and add to your collection. Find them here and here.
You will need these tools and materials to DIY your gold bra body chain:
1: Pliers. You’ll need the round nose and flat nose pliers.
2: One long piece of gold chain that fits loosely around your ribcage. This will be the longest piece of chain.
3: One necklace length piece of gold chain that fits around your neck and down to the tops of the bra triangles.
4: Two pieces of gold chain the same length, measure your chest or against a bikini to get the right length to form the triangles of the bra.
5: Six small gold jump rings.
6: Four larger gold jump rings.
7: Two gold lobster clasps.
Now follow these steps to make your gold body chain bra:
1: Add one of the larger jump rings to one end of the longest piece of chain.
2: Add the first lobster clasp to this open jump ring. Close the jump ring to secure the clasp to the chain.
3: Add the other jump ring to the other side of the longest chain. Close it using your pliers to secure it in place.
4: Take one of the bra chains and place it slightly off centre of the longest chain. Attach it using one of the small jump rings. I selected the position by trying it on and measuring it against my body, however, checking against a triangle bikini top that fits you well.
5: Attach the second bra chain to the longest chain following the same process.
6: Measure out how wide you want the triangles to be by trying the bra chain on or comparing to a bikini and attach the other ends of the bra chains using the small jump rings.
7: Pull the bra chains into triangle shapes to find the middles.
8: Attach the necklace length chain to the middles of these triangles using the remaining small jump rings.
9: Separate the necklace length chain in half, now attached to the bra chains using your pliers.
10: Attach the second lobster clasp to one side of the separated chain using one of the larger jump rings.
11: Attach the last jump ring to the other side of the chain to finish the bra body chain off.
Now you can wear it!
How sexy and cool is this body chain design? I love it!
This tutorial contains affiliate links.
