-
How to add cute square charms to a pair of hoop earrings!
These hoop earrings are really cute! Each hoop has a little dangly beaded square charm which moves prettily as you wear them! This is a really special way to upgrade a basic hoop finding. Please note that this tutorial contains affiliate links.
Grab these tools and materials to make your earrings:
1: A pair of hoop findings.
2: Eight eye pins.
3: Four head pins.
4: Four small jump rings.
5: Four large jump rings.
6: Glass beads. I used yellow glass e-beads.
7: Some accent beads, I used four blue seed beads and four silver-tone beads.
8: Pliers. I used my flat nose and round nose pliers for this pair of earrings.
Follow these steps to make your elevated hoop earrings:
1: Add beads to one of the eye pins.
2: Bend the end of the pin to form an angle.
3: Curl the end of the pin around the round nose pliers to make a loop. This secures the beads in place.
4: Repeat steps 1-3 for the remaining seven eye pins. Now you will have eight beaded pins.
5: Take four of the pins and join them together to form a chain.
6: Do this again for the second set of pins.
7: Attach the ends of each chain together to make a square shape.
8: Set the two squares aside.
9: Add two of the accent beads to the head pins.
10: Wrap the end of the pin around the round nose pliers to create a loop.
11: Repeat steps 9 and 10 for the other three pins, using up the rest of the beads.
12: Attach two of the charms you just made to the bottom corners of each of the squares using the small jump rings.
13: Add the larger jump rings to the top corners of the squares.
14: Using the larger jump rings, slide a charm onto each of the hoops.
Now your elevated hoop earrings are finished and ready to wear! How fun is this design? I love how they move and wiggle as I wear them!
Here are some other ways you can incorporate beaded squares into your jewelry:
-
Letter bead hoop earrings so you can send a message with your earlobes!
Letter beads are a nostalgic trend that have become really popular in the last couple of years. Here’s how you can use them to send a message to people… adding words to hoop earrings! This is a super easy DIY that has lots of personality. As an added bonus, you don’t even need tools to make these letter bead hoop earrings! Please note that this tutorial contains affiliate links.
Here’s what you’ll need to make your letter bead message hoop earrings:
1: A pair of hoop earrings. I used these silver-tone hoops with a lever back.
or find some here:
2: Letter beads. I used these colourful see-through letter beads.
Here are some other beads:
Follow these steps to make your cute message hoop earrings:
1: Open the earring.
2: Add one of the letter beads to the hoop, you need to put them on in reverse order and upside down to have them readable when they’re on the earring. (This isn’t as important if your chosen letters are symmetrical like H and I are!)
3: Add the other letter to the first earring, I made this one say HI.
4: And now you can add the rest of the beads to the second earring, mine says BYE so add the ‘E’ bead first, upside down.
5: Add the remaining two beads, remember to flip them upside down before sliding them onto the earring.
Now all your beads are in place and you can wear your earrings! How easy are these cuties to put together?
I hope you come up with some fun and sassy messages to send with your earrings!
Here’s another letter bead tutorial if you liked this one.
-
These earrings have not one, not two… but three hoops! Here’s how to make them.
Do you love it when your earrings to do the most? These earrings are a true hoop statement, made with three hoops that nest into each other. I think these are so cute!
Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials to make your triple hoop earrings:
1: Six pieces of wire in three different lengths (two pieces of each length). The longest piece of wire will determine the size of the rest of the hoops. I used copper wire.
2: Six small jump rings.
3: A pair of earring hooks.
4: Beads of your choice. I used six red timber beads and some yellow glass e-beads.
Follow these steps to make your triple hoop earrings:
1: Create a loop at one of the ends of the long wires using your round nose pliers. Do this by creating a right angle first and then looping that small end of the wire around the barrel of your pliers.
2: Add beads to the wire in your chosen pattern. I beaded mine primarily with the yellow beads, placing a red timber bead in the centre. You can estimate the centre of the wire by forming it into a rough circle shape.
3: Once the wire is beaded, with 1cm left bare, create another loop at the end of the wire. This will secure the beads in place. Open the end loop up a bit and slide it into the loop you made at the start, close it to secure the ends together and form the circle shape.
4: Repeat steps 1-3 for the rest of the wires to create six circles.
5: Take one of the biggest circles and one of the medium circles. Attach them together using one of the jump rings. Slide the jump ring through the loops at the top of each hoop and close it to secure them together.
6: Repeat step 5 to attach the smallest hoop to the middle hoop so that you have a stack of three hoops attached together.
7: Repeat steps 5 and 6 for the second set of hoops.
8: Attach an earring hook to both sets of hoops to finish them off.
Now your cute triple hoops are finished and ready to wear!
If you like this design, here are some other multi-hoop earring tutorials:
-
Add a cool feature to your hoop earring designs by using toggle clasps… here’s how!
These earrings use toggle clasps to add an interesting feature to your standard beaded hoop earrings. Make lots of charms to switch them up and mix and match. This tutorial contains affiliate links.
You’ll need these tools and materials to make your toggle clasp hoop earrings:
1: Pliers. I used my cutting pliers, round nose pliers and flat nose pliers.
2: Two pieces of bracelet sized memory wire.
3: Two toggle clasp sets.
4: Four jump rings.
5: A pair of stud earrings with charm loops.
6: Beads. I used these silver lined clear glass beads and some wooden chip beads.
Follow these steps to make your toggle clasp hoop earrings:
1: Create a loop at one end of the memory wire using the round nose pliers.
2: Add beads to the wire in any pattern you choose.
3: When there is approximately 1cm of the wire left unbeaded, create a loop at the other end of the wire and thread it through the initial loop you made to close the beaded hoop.
4: Repeat steps 1-3 for the second hoop.
5: Add the circle parts of the toggle clasps to the top of each hoop, attaching them using two of the jump rings.
6: Add the toggle part of the clasps to each of the post earrings using the remaining jump rings.
7: Now you can attach the hoops to the earrings and wear them out!
If you like your earrings to be customisable, here’s another charm earring tutorial with clip on charms.
This tutorial contains affiliate links.
-
How to make beaded love heart earrings.
Do you remember the love heart necklace tutorial? Here’s how to make love heart earrings too! Contains affiliate links.
You will need the following tools and materials to make your beaded love heart earrings:
1: Pliers. You’ll need flat nose pliers, cutting pliers and round nose pliers.
2: Four pieces of wire cut to approximately 12cm long.
3: Earring hooks.
4: Beads. I used timber beads and some yellow glass beads.
Follow these steps to make your love heart earrings:
1: Create a loop at one end of the wire using the round nose pliers.
2: Add beads to the wire leaving 1cm unbeaded.
3: Create a loop at the other end of the wire using the round nose pliers.
4: Repeat steps 1-3 for the remaining pieces of wire, make 2 wires with the timber beads and 2 with the glass beads.
5: Link one of the timber bead wires to the glass bead wires and one end.
6: Form the wires into a heart shape and link the wires at the bottom of the heart.
7: Repeat these steps for the second heart.
8: Squash the bottom loops of each earring so that it doesn’t fold in half when it hangs from your ears.
9: Add an earring hook to the top of each heart earring.
Now your love heart earrings are ready to wear!
-
How to Make Pearl Tassels for Your Hoop Earrings
These pearl tassel hoops are a fun way to get on the pearl jewelry trend! Contains affiliate links.
You’ll need the following tools and materials to make your pearl tassel earrings:
1: Pliers. You will need round nose pliers and flat nose pliers to make these earrings.
2: A pair of small hoop earrings. I used these skinny silver hoops.
3: Two eye pins.
4: Six head pins.
5: Two jump rings.
6: Two pearl beads.
7: Mixed beads for the tassels.
Follow these steps to make your pearl tassel earrings:
1: Add the pearls to each of the eye pins.
2: Loop the ends of the eye pins using the round nose pliers to secure the beads on the pin.
3: Add beads to each of the head pins in your chosen design. Make two of each tassel so that your earrings match.
4: Loop the ends of each head pin with the round nose pliers to secure the beads in place.
5: Add three head pins to one of the jump rings and attach the tassel to the bottom of the pearl charm.
6: Repeat step five for the remaining head pins attaching them to the other pearl charm.
7: Slide a tassel on each hoop earring to finish them off.
How cute are these little hoops? Pop them on and turn heads!
