-
Need help keeping hold of your phone? Here’s how to make a cute chain and rhinestone phone strap so its harder to lose!
I’m loving making phone straps lately! This one combines a chunky chain with some rhinestone trim to create this double stranded phone strap. I decided to add the extra chain for more strength! Please note that this tutorial contains affiliate links.
You will need the following tools and materials to make this phone strap:
1: Pliers. I used my flat nose pliers, round nose pliers and cutting pliers. I also used scissors to trim my string.
2: A piece of chain about 30cm long. I used this silver tone chunky curb chain.
3: A piece of rhinestone trim about the same length as the chain.
4: Two crimp ends.
5: A large jump ring.
6: A piece of string. I used this hot pink nylon string that I cut to be about 15cm long.
7: Super glue.
Follow these steps to make your rhinestone phone strap:
1: Take one end of the rhinestone strand and place it in one of the crimp ends.
2: Squash one side of the crimp around the end of the rhinestones using the flat nose pliers.
3: Repeat the squeezing of the crimp for the other side, folding it around the end of the rhinestones. Squeeze until the crimp feels securely attached to the rhinestone strand.
4: Repeat steps 2 and 3 for the other end of the rhinestone chain.
5: Add one end of the chain and rhinestone strand to the jump ring.
6: Add the other end of the chain and rhinestone strand to the jump ring in the same order.
7: Close the jump ring using your pliers.
8: Fold the string in half and tie the open ends around the jump ring, loop and knot it a few times to secure it.
9: Trim the ends of the string.
10: Add a dab of super glue to the ends of the string to secure the knot.
Now your double strand phone strap is finished and ready to pop on your phone. Loop it through on of the holes on your phone case for more phone customisation!
-
Like to keep track of your phone? Here’s how to make a handy chain phone strap.
This phone strap is minimalist in design and fairly easy to put together. Phone straps seem to be increasingly popular at the moment, so here’s how you can make one of your own. Please note that this tutorial contains affiliate links.
Grab these tools and materials to make your own chain phone strap:
1: Your jewellery pliers. I used my flat nose and round nose pliers.
2: Some chunky chain, I used about 42cm of chain but you could use less or more depending on the size you want your strap.
3: A sturdy jump ring.
4: A keychain with a phone loop.
Follow these steps to make your chunky chain phone strap:
1: Add both ends of the chain to the jump ring.
2: Add the keychain to the jump ring.
3: Close the jump ring using your pliers.
And that’s it, done in three steps! Now you can attach it to your phone case by looping the little loop around a hole in your phone case, pulling the strap through and then pulling it tight.
Here is another phone strap tutorial in case you like some variety when it comes to your phone accessories!
