Here’s how to assemble a pair of pearl stud earrings!
Have you ever wanted a pair of pearl earrings, but been curious wether you could make them yourself? Well look no further than this tutorial. We’ve got all the steps to show you how to make your own pair of pearl studs. So cute and elegant. Please note that this tutorial contains affiliate links for which we may receive a commission.
You’ll need the following tools and materials to make your pearl earrings:
1: A pair of half-drilled pearls.

2: A pair of sterling silver pearl post studs. I had flat pearls so I used a flat post, but if your pearls are more rounded, I recommend using a cup stud finding. If you want to be extra fancy, you can also buy posts made in solid gold.
You can get some pearls here:

I used these ones:
You can get some similar ones here:
3: Two part epoxy glue. I used Araldite but you can use other brands too.

You can get some here:
4: A piece of scrap wire or something thin for applying the glue.

5: A scrap piece of paper.

6: A skewer or paddle-pop stick for mixing the glue.

You can get skewers here:
7: A pair of earring backs.

You can get some here:
Follow these steps to construct your very own pair of pearl stud earrings:
1: Squeeze the glue out in equal parts onto the scrap piece of paper.


2: Mix the glue using the skewer. You will need to work quickly once your glue is mixed to ensure the glue holds well.

3: Using the thin wire, apply a small amount of glue to each of the pearl posts and the holes in each of the pearls.



4: Place the pearls on the posts and wipe up excess glue
5: Set the earrings aside to dry.
Once the glue is set, and you have added your earring backs, your new pearl stud earrings are ready to wear! A gorgeous and simple DIY that you can do in an afternoon. Here’s what the finished product looks like. Simple and lovely.




