Little pieces of chain aren’t useless… turn them into pretty delicate chain ring!

You will need the following tools and materials to make this ring:

1: Pliers. You will need your round nose pliers and flat nose pliers to make this chain ring.

2: A small piece of chain. Don’t worry if it isn’t quite long enough to fit entirely around your finger.

3: Two small jump rings. I used these small gold ones.

4: One large jump ring.

5: One medium sized jump ring.

6: Three head pins.

7: Three beads. I used these pink glass e-beads.

Follow these steps to make your chain ring:

1: Add a small jump ring to either side of the chain.

2: Attach the end jump rings to the large jump ring to form a completed loop.

3: Add each of the beads to each of the head pins.

4: Loop the ends of each pin using the round nose pliers.

5: Add each of the pins to the medium sized jump ring.

6: Attach the jump rings with the bead charms to the large jump ring in the middle of the chain ring. Use your pliers to close the jump ring and secure the charms in place.

Now your ring is finished. So easy and unique!