-
How to make a pair of triangle statement earrings!
Here’s how to make a cute pair of statement earrings, these are such a fun design that pack a bold punch with their size and colours. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make these earrings:
1: Eight pieces of wire all the same length. I used 0.8mm copper wire.
Here’s a pre-made eye pin option if you don’t feel like making them yourself: https://tidd.ly/3WCad6D
2: Four statement beads. I used these polymer clay beads I made. Here’s a polymer clay bead tutorial for you.
3: Some accent beads. I used these timber beads.
4: A pair of earring hooks. If you don’t have any, you can find tutorials that show you how to make your own here, here and here.
5: Some flat nose pliers and round nose pliers. You will also need your cutting pliers if you are not using pre-made eye pins.
Follow these steps to make your amazing triangle statement earrings:
1: Bend the end of each wire to form a right angle using the flat nose pliers.
2: Loop the end of each wire using round nose pliers.
3: Add beads to two of the wires, these will form the bottom of your triangles. I added some statement beads to each of these wires.
4: Bend the ends of the beaded wires to form another right angle.
5: Loop the end of the wire using the round nose pliers. This will secure the beads in place.
6: Repeat steps 3-5 for two more of the pins, these will be used to attach the triangles to the earring hooks.
7: Add your accent beads to the four remaining wires to create four solid beaded pins, secure the beads in place as you did in steps 4 and 5.
8: Now it is time to start assembling your earrings, Add one of the solid beaded wires to one of the accent beaded wires.
9: Add a second solid beaded wire to the first accent beaded wire, so you have one statement beaded wire with two solid beaded wires attached.
10: Add a second statement beaded wire to the earring, attaching each end to each of the solid beaded wires to form a triangle shape.
11: Repeat steps 8 to 10 for the second earring.
12: Attach each of the earring hooks to the triangle forms. Once both earring hooks are attached your earrings are finished and ready to wear out! How will you style yours?
Here are the finished earrings!
-
These earrings have not one, not two… but three hoops! Here’s how to make them.
Do you love it when your earrings to do the most? These earrings are a true hoop statement, made with three hoops that nest into each other. I think these are so cute!
Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials to make your triple hoop earrings:
1: Six pieces of wire in three different lengths (two pieces of each length). The longest piece of wire will determine the size of the rest of the hoops. I used copper wire.
2: Six small jump rings.
3: A pair of earring hooks.
4: Beads of your choice. I used six red timber beads and some yellow glass e-beads.
Follow these steps to make your triple hoop earrings:
1: Create a loop at one of the ends of the long wires using your round nose pliers. Do this by creating a right angle first and then looping that small end of the wire around the barrel of your pliers.
2: Add beads to the wire in your chosen pattern. I beaded mine primarily with the yellow beads, placing a red timber bead in the centre. You can estimate the centre of the wire by forming it into a rough circle shape.
3: Once the wire is beaded, with 1cm left bare, create another loop at the end of the wire. This will secure the beads in place. Open the end loop up a bit and slide it into the loop you made at the start, close it to secure the ends together and form the circle shape.
4: Repeat steps 1-3 for the rest of the wires to create six circles.
5: Take one of the biggest circles and one of the medium circles. Attach them together using one of the jump rings. Slide the jump ring through the loops at the top of each hoop and close it to secure them together.
6: Repeat step 5 to attach the smallest hoop to the middle hoop so that you have a stack of three hoops attached together.
7: Repeat steps 5 and 6 for the second set of hoops.
8: Attach an earring hook to both sets of hoops to finish them off.
Now your cute triple hoops are finished and ready to wear!
If you like this design, here are some other multi-hoop earring tutorials:
-
I’m not sure what to call this design, but it sure is cute! Here’s a new beaded earring tutorial.
These earrings are made from four pieces of bracelet length memory wire, attached together to form an eye shape. These cute earrings can be beaded up in lots of different colors to suit your preference. This tutorial contains affiliate links.
You’ll need the following tools and materials to make your earrings:
1: Pliers. I used my cutting pliers and round nose pliers.
2: Bracelet length memory wire cut into four equal half circle pieces.
3: Earring hooks.
4: Four small jump rings.
5: Two big jump rings.
6: Beads. I used orange and clear glass beads.
Follow these steps to make your new earrings:
1: Curl one end of one of the wires to form a loop using the round nose pliers.
2: Add beads to the wire and leave a 1cm section unbeaded.
3: Use the round nose pliers again to curl the other end of the wire and secure the beads on the wire.
4: Repeat steps 1 to 3 for the remaining three wires, beading two wires in one colour and two in the other.
5: Start attaching the wires together. Take one of the clear beaded wires and one of the orange ones and attach them together using one of the small jump rings.
6: Now attach the other side together to form a squashed circle/eye shape.
7: Repeat steps 6 and 7 for the other earring.
8: Add the earring hooks to each of the beaded eye shapes using the large jump rings. I made mine asymmetrical so that one has an orange top and the other has a clear top.
Now your earrings are finished! How cute is this design?
-
Here’s how to make a pair of cute beaded chain earrings!
These earrings are made using soft wire and beads to make a chunky chain that dangles from each ear. These really cute earrings are fun to make and look so fun.
You’ll need these tools and materials to make these earrings:
1: Pliers. I used my cutting pliers (left), flat nose pliers (right) and round nose pliers (middle) to make these earrings.
2: Some thin soft wire. I used six pieces (approx 7cm long) of wire that I recycled from an old project.
3: Some beads. I used green and gold glass e-beads.
Gold beads: https://amzn.to/3S3zwfi
Green beads: https://amzn.to/3QTdMlj
4: Two small jump rings.
5: Two earring hooks.
Follow these steps to make your chunky bead chain hoops:
1: Take a piece of wire and curl one end around the round nose pliers.
2: Add beads to the wire until there is 1cm left without beads.
3: Put the end of the wire back through the first loop you made.
4: Curl the other end of the wire so that the beaded circle is closed.
5: Make another beaded circle, thread it through the first circle you made before you secure it closed.
6: Make a third beaded circle and attached it to the first two so that you have a chain of three.
7: Repeat steps 1 to 6 for the second earring.
8: Attach the earring hooks to the top of each chain using the small jump rings.
Now your chain earrings are finished and ready to wear!!!
Here is a four link version I made as well
This tutorial contains affiliate links.
-
Want some lightweight earrings? This ribbon design has you covered.
These lightweight earrings are really cute! Made out of beads and ribbons they’ll pack a visual punch without weighing your lobes down. They can also be made with materials you might already have at home. I don’t know about you but I have loads of ribbons that I have saved from gifts and shopping bags.
You’ll need the following tools and materials to make these lightweight ribbon earrings:
1: Pliers. You’ll need your flat nose and round nose pliers.
2: Two pieces of ribbon. I used this thin (approx 1cm wide) blue satin ribbon. Each piece was approximately 7cm long.
3: Two large jump rings.
4: Two flat end crimps.
5: Two earring hooks.
6: Two small head pins.
4: Beads. I used four green glass beads.
Follow these steps to make your lightweight ribbon earrings:
1: Fold the ribbon around so that it forms a folded loop. You can achieve this by layering the ends over each other facing the same way up.
2: Add the flat crimp to the ends of the ribbon and squash them using the flat nose pliers.
3: Add the glass beads to each of the head pins.
4: Curl the ends of the pins to secure the beads.
5: Add the beaded pins to each of the jump rings.
6: Close the jump rings around the bottom of each ribbon loop.
7: Attach each of the earring hooks to the crimps at the top of each ribbon charm.
Now your cute ribbon earrings are ready to wear!
Note: This article contains affiliate links
Here are some other ribbon earring DIYs
-
This video shows you how to make some fluttering silk earrings!
Check out this vid for all the tools, materials and steps you need to make a cute pair of earrings using silk. I made mine out of some silk recycled from a dress that I altered. If you have some old fabric or old worn out clothes this tutorial is one way that you can recycle those materials
Here are some affiliate links so you can buy some of the materials to make these silk earrings:
1: Eye pins
2: Wooden beads
3: Glass beads
4: Earring hooks
5: Crimp ends
Here are the finished earrings, what colours will you feature in your version of this cool DIY?
-
Here’s how to make some cool chandelier earrings!
These earrings are pretty cool! They feature some differently sized hoops that hang from a beaded bar for a stunning statement.
You will need the following tools and materials to make your earrings:
1: Pliers. You’ll need flat nose pliers and round nose pliers. Keep your cutting pliers around just in case.
2: Some thin wire. I used some wire recycled from an old design and cut it into four pieces, two long and two short.
3: Two long eye pins.
4: Four smaller eye pins.
5: Earring hooks.
6: Four small jump rings.
7: Beads. I used some timber beads, rose quartz beads and mixed glass beads.
Follow these steps to make your chandelier earrings:
1: Curl the end of one of the long thin wires using the round nose pliers.
2: Bead the wire using the mixed glass beads.
3: Curl the other end of the wire to secure the beads in place. Then form the wire into a circle shape.
4: Repeat steps 1 to 3 for the other thin wires. I used the rose quartz beads on the shorter pieces of wire.
5: Link the ends of each circle using the jump rings.
6: Add more of the coloured beads to the four small eye pins.
7: Loop the end of each eye pin and set them aside.
8: Add some of the wooden beads to one of the longer eye pins. I added six to meet the middle of the pin (but leaving room for the end to be looped later). The add one of the earring hooks to the pin.
9: Add another set of beads so that there is an even amount either side of the earring hooks. Repeat this for the second pin.
10: Loop the ends of the pins to secure the beads and earring hook in place.
12: Attach each of the smaller eye pins to the top of each of the circle charms.
13: Attach the charms to either side of the long pins with the earring hooks, make sure that each earring has one large and one small circle charm.
Now your earrings are finished and ready to wear! How special are these?
-
These are amazing! Here’s a tutorial to make some beaded fringe earrings.
These beaded fringe earrings look so pretty! Use a variety of glass beads to make your own versions of the design. Contains affiliate links.
You will need the following tools and materials to make your beaded fringe earrings:
1: Pliers. You will need your flat nose pliers and round nose pliers.
2: Sixteen head pins.
3: Two eye pins.
4: Two earring hooks.
5: Beads of your choice. I used some different colored glass beads and four pink plastic beads.
6: Four jump rings.
Follow these steps to make your beaded fringe earrings:
1: Add beads to twelve of the head pins.
2: loop the tops of the pins to keep the beads in place.
3: Add the different colored beads and the pins in a pattern to the eye pin.
4: Add the earring hook halfway along the beaded eye pin.
5: Finish beading the eye pin and create a loop at the other end of the pin to secure the beads and charms in place.
6: Repeat steps 3 to 5 for the second earring.
6: Add the plastic beads to the remaining four head pins.
7: Loop the ends of the four extra charms.
8: Attach the four charms to either end of the top of the earrings to finish them off.
Now your fringe earrings are finished and ready to wear!
I also made a pair using black and white glass beads.
If you like the look of fringe jewelry, check out this beaded fringe necklace.
This tutorial contains affiliate links.
-
Fruity Hoops! Here’s how to get in on the fruit jewelry trend.
Fruity jewelry is all over the place, why not get in on the trend with some beaded fruit hoops?
You will need the following tools and materials to make your beaded fruit hoops:
1: Pliers. You will need your cutting pliers, flat nose pliers and round nose pliers to make your fruit hoops.
2: Two pieces of wire approximately 12cm long.
3: Two earring hooks.
4: Beads of your choice. I used some glass beads.
5: Glass fruit charms. I used these pairs of glass charms.
Follow these steps to make your beaded fruit hoop earrings:
1: Create a loop at one end of one of the pieces of wire using the round nose pliers.
2: Add beads and glass charms to the wire in your pattern of choice.
3: Trim the excess wire so that there is only 1cm left.
4: Create a loop at the other end of the wire to secure the beads on the wire.
5: Bend the wire gently around to form a circle and link the end loops together.
6: Repeat steps 1-5 for the other piece of wire, making the second hoop.
7: Add an earring hook to the top of each hoop to finish your earrings off.
Now your fruity hoop earrings are ready to wear! How cute are they?
-
Here’s how to use feathers in your jewelry, feather hoop earrings!
Here’s an idea for incorporating shells into your DIY jewelry creations, make yourself some shell hoop earrings!
You will need the following tools and materials to make your feather hoop earrings:
1: Pliers. You will need your round nose pliers, cutting pliers and flat nose pliers.
2: Two pieces of wire approximately 10cm long.
3. Two earring hooks.
4: Two feathers. I used two small ones that I found outside.
5: Two leather crimp ends.
6: Two large jump rings.
7: Beads of your choice. I used these yellow and blue glass beads.
Follow these steps to make your feather hoop earrings:
1: Trim the ends of the feathers.
2: Secure a leather crimp end around the ends of each feather using the flat nose pliers.
3: Set the feathers aside.
4: Create a loop at the end of each piece of wire.
5: Add your beads in any pattern you choose, leave 1cm un-beaded.
6: Create a loop at the other end of the wire to secure the beads on the wire.
7: Form the wires into a circle shape.
8: Link the ends of the circles together to close it off.
9: Add a feather to each hoop using each of the large jump rings.
10: Add an earring hook to the top of each circle to finish the earrings off.
Now your feather earrings are finished and ready to wear!
