These earrings are SO Awesome! Here’s how to make some special chain dangle hoop earrings.

These earrings are hoops… with a twist. These beaded hoop earrings dangle down on some delicate chains. Features affiliate links.

You will need the following tools and materials to make your earrings:

1: Pliers. You will need your round nose pliers, flat nose pliers and jump rings to make these earrings.

2: Two pieces of wire approximately 12cm long.

3: Two short pieces of chain.

https://amzn.to/3CKZkbQ

4: Two small jump rings.

5: Two larger jump rings.

6: Two charm connector earrings.

7: Beads of your choice. I used a selection of green glass beads.

Follow these steps to make your earrings:

1: Create a loop at the end of each piece of wire using the round nose pliers.

2: Add beads to both pieces of wire in pattern of your choice.

3: Once the pieces are beaded with 1cm of wire left unbeaded, create a loop at the end of each piece of wire.

4: Attach each of the ends of the wire together by the loops. Secure them in place using the round nose pliers to close them.

5: You will now have two beaded loops.

6: Attach a chain to each loop using the larger jump rings.

7: Attach the other end of the chains to each of the charm connector earrings to finish the earrings off. Connect the earring charms to the earring posts using the smaller jump rings.

Now the charms are attached to the earring posts your earrings are finished and ready to wear!