-
This earring is HOT! Combine pearls and glass charms to make a cool statement earring
I can’t get enough of glass food charms. Here’s another idea for how you can use them in your jewelry designs. This earring uses pearls and a glass chilli charm to make something very sexy!
You will need the following tools and materials to make your pearl chilli earring:
1: Pliers. You’ll need your round nose and flat nose pliers.
2: An eye pin.
3: A charm loop earring finding.
4: Two jump rings. One larger and one small.
5: A glass chilli charm.
6: Three freshwater pearl beads.
Follow these steps to make your pearl chilli earring:
1: Add the pearls to the eye pin.
2: Create a loop at the end of the pin to secure the pearls in place.
3: Add the chilli charm to one end of the pearl pin using the large jump ring.
4: Add the earring to the other end of the pearl pin using the smaller jump ring.
Now your earring is finished and ready to wear! How cool?!
-
Fruity Hoops! Here’s how to get in on the fruit jewelry trend.
Fruity jewelry is all over the place, why not get in on the trend with some beaded fruit hoops?
You will need the following tools and materials to make your beaded fruit hoops:
1: Pliers. You will need your cutting pliers, flat nose pliers and round nose pliers to make your fruit hoops.
2: Two pieces of wire approximately 12cm long.
3: Two earring hooks.
4: Beads of your choice. I used some glass beads.
5: Glass fruit charms. I used these pairs of glass charms.
Follow these steps to make your beaded fruit hoop earrings:
1: Create a loop at one end of one of the pieces of wire using the round nose pliers.
2: Add beads and glass charms to the wire in your pattern of choice.
3: Trim the excess wire so that there is only 1cm left.
4: Create a loop at the other end of the wire to secure the beads on the wire.
5: Bend the wire gently around to form a circle and link the end loops together.
6: Repeat steps 1-5 for the other piece of wire, making the second hoop.
7: Add an earring hook to the top of each hoop to finish your earrings off.
Now your fruity hoop earrings are ready to wear! How cute are they?
-
How to make a beaded teardrop pendant
Here’s how to make a cute beaded teardrop pendant using memory wire. If you’re sick of making chokers with your memory wire coil this is another way to use it!
You will need the following tools and materials to make your teardrop pendant:
1: Pliers. You’ll need your cutting pliers, flat nose pliers and round nose pliers.
2: A piece of memory wire, half of a necklace loop.
3: Beads. I used these mixed glass seed beads.
Follow these steps to make your teardrop pendant:
1: Create a loop at the end of one side of the piece of memory wire.
2: Add the beads to the wire until there is only 1cm left unbeaded.
3: Create a loop at the other end of the wire securing the beads in place.
4: Link the loops together to form the teardrop shape.
Now your pendant is finished you can attach it to a chain or beaded strand of your choice!
Here’s a pair of earrings I made using the same technique. Just add an earring hook to the top of each teardrop instead of a chain!
-
Here’s how to make a beaded circle lariat necklace. So cool!
Do you remember the triangle lariat tutorial? Here’s how to make a beaded circle lariat to add to your collection!
You will need the following tools and materials to make this lariat necklace:
1: Pliers. You will need your cutting pliers to cut your wire, flat nose pliers and round nose pliers.
2: Two pieces of wire, one longer than the other.
3: Two pieces of chain, a necklace length piece and another that is approximately 10cm long.
4: A lobster clasp.
5: Two small jump rings.
6: One large jump ring.
7: Beads of your choice. I used some natural colored wooden beads.
Follow these steps to make your circle lariat necklace:
1: Create a loop at one end of the longer piece of wire using your round nose pliers.
2: Add beads to the wire until there is only 1cm left unbeaded.
3: Create another loop at the end of the wire to secure the beads in place.
4: Gently bend the wire into a circle shape, carefully open one of the loops and link the two ends together to secure the circle shape in place.
5: Repeat steps 1-4 for the second piece of wire, making a smaller circle.
6: Open one of the loops on the smaller circle and attach one end of the short chain.
7: Attach the other end of the short chain the same way to the larger circle.
8: Add a small jump ring to one end of the long piece of chain and use it to secure the lobster clasp in place.
9: Add the other small jump ring to the other end of the long chain.
10: Use the large jump ring to attach the circle charms to the chain like you would a pendant.
Now your necklace is finished!
Here’s another circle lariat I made using copper chain and yellow and purple glass beads.
-
How to make textured arch threader earrings
Here’s how to add some extra flare to your threader earrings… add some texture! Use a hammer to add some glittery facets to your wire threader earrings.
You will need the following tools and materials to make your earrings:
1: Cutting pliers to cut your wire to length.
2: Two pieces of wire. I used some sterling silver wire approximately 4.5cm long.
3: A steel block.
4: A hammer.
5: A file.
6: Tape.
7: A pen or something else that is round to shape your wire around.
Follow these steps to make your textured wire threader earrings:
1: Hammer the wire so that it is textured on all surfaces. Do this by hitting the wire lightly with the edge of the hammer.
2: Once both pieces are textured line them up and tape them to the pen.
3: Bend the wire around the pen to form a curved arch shape.
4: Take the wire off the pen.
5: File the ends of the wire until they are smooth.
Once your earrings are filed they are ready to wear! How cute are these little arch threader earrings?!
-
This necklace is special! Make one of your own today.
This necklace looks amazing, it’s a really cool way to use your favorite drop beads.
You will need the following tools and materials to make your necklace:
1:Pliers. You will need your flat nose pliers and round nose pliers.
2: Two pieces of chain to form the length of your necklace.
3: Two pieces of wire or two eye pins, one longer than the other.
4: A toggle clasp.
5: Four jump rings.
6: Beads of your choice. I used some frosted blue glass beads and a turquoise droplet bead.
Follow these steps to make your necklace:
1: If you are using wire, make a loop at the end of the longer piece of the wire.
2: Add the beads to the wire until there is only 1cm left without beads.
3: Create a loop at the other end of the wire.
4: Create a loop at the end of the shorter piece of wire.
5: Add the turquoise bead to the wire.
6: Create a loop at the other end of the wire using the round nose pliers to secure the bead on the wire.
7: Bend the longer beaded wire into a U shape and attach the drop bead to the inside of the U.
8: Attach each piece of chain to either side of the beaded U shape using two of the jump rings.
9: Attach each component of the toggle clasp to either end of the chain to finish the necklace. Secure them in place using the two remaining jump rings.
Now your necklace is finished!
Here’s another one I made with a longer U and a glass feature bead.
-
How to make a mixed media double strand necklace. Chains and beads for the win!
This necklace is another version of the double strand necklace. One strand is made using glass seed beads, the other with chain and gemstone beads!
You will need the following tools and materials to make your necklace:
1: Pliers. You will need your round nose pliers, flat nose pliers and cutting pliers to make your necklace.
2: A piece of tiger tail wire. Cut yours to your desired length, I made mine shorter than the chain component.
3: Glass seed beads. I used a mix of multi-colored beads.
4: Two pieces of chain.
5: An eye pin.
AliExpress.com Product – Free Shipping! 300PCs Silver Plated Eye Pins 50×0.7mm(21 gauge) (B01727)7: A large feature bead. I used this gemstone slice bead.
8: Two medium sized jump rings.
9: A lobster clasp.
10: Four crimp beads.
Follow these steps to make your double strand necklace:
1: Put the gemstone bead onto the eye pin.
2: Bend the pin to form a right angle with the bead.
3: Create a loop using the round nose pliers to secure the bead onto the pin.
4: Add a piece of chain to each side of the eye pin.
5: Set the chain piece aside.
6: Add two crimp beads and a jump ring to the end of the tiger tail wire.
7: Loop the end of the wire around the jump ring and pull it through the crimp beads.
8: Squash the crimp beads using the flat nose pliers.
9: Start adding the beads to the wire. I added my beads in a random order but you can create any pattern you choose.
10: Continue adding beads until your necklace has reached your desired length.
11: Add the other two crimp beads and the remaining jump ring to the wire.
12: Loop the end of the wire around the jump ring and back through the crimp beads, pull the wire tight.
13: Squash the crimps.
14: Trim the excess wire.
Your beaded strand is now finished!
15: Open one of the jump rings and attach one side of the chain. Add the clasp to the open jump ring and then close it to secure the components together.
16: Add the other side of the chain component to the other side of the beaded strand. Once the other side is attached the necklace is finished and ready to wear.
Pretty cool huh?!
-
These earrings are SO Awesome! Here’s how to make some special chain dangle hoop earrings.
These earrings are hoops… with a twist. These beaded hoop earrings dangle down on some delicate chains. Features affiliate links.
You will need the following tools and materials to make your earrings:
1: Pliers. You will need your round nose pliers, flat nose pliers and jump rings to make these earrings.
2: Two pieces of wire approximately 12cm long.
3: Two short pieces of chain.
4: Two small jump rings.
5: Two larger jump rings.
6: Two charm connector earrings.
7: Beads of your choice. I used a selection of green glass beads.
Follow these steps to make your earrings:
1: Create a loop at the end of each piece of wire using the round nose pliers.
2: Add beads to both pieces of wire in pattern of your choice.
3: Once the pieces are beaded with 1cm of wire left unbeaded, create a loop at the end of each piece of wire.
4: Attach each of the ends of the wire together by the loops. Secure them in place using the round nose pliers to close them.
5: You will now have two beaded loops.
6: Attach a chain to each loop using the larger jump rings.
7: Attach the other end of the chains to each of the charm connector earrings to finish the earrings off. Connect the earring charms to the earring posts using the smaller jump rings.
Now the charms are attached to the earring posts your earrings are finished and ready to wear!
-
Do You Want More Special Charms In your life? Why not try making this free-form bead and wire charm?
This charm tutorial is a really fun way to use your special decorative beads. I like making them with unique glass beads! Note: includes affiliate links.
You will need the following tools and materials to make your bead charm:
1: Pliers. You will need your round nose pliers and cutting pliers to make this charm.
2: A hammer.
3: A steel hammer block.
4: Soft jewelry wire.
5: A file.
6: A bead of your choice. I used this glass bead.
Follow these steps to make your free form charm:
1: Cut the wire to be approximately 12-15 cm long using the cutting pliers.
2: Hammer the end of the wire wide and flat using the hammer. It should be wide enough to keep your bead from falling off the wire.
3: Hammer the rest of the wire flat but not so wide that your bead won’t go onto the wire.
4: File the ends of the wire so that they are not sharp.
5: Add the bead to the wire, securing it against the widest end of the wire.
6: bend the wire around the bead in any formation you like.
7: Bend the end of the wire into a bail at the top of your bead, you can use the round nose pliers to make this look neat.
Once your bail has been made your pendant is complete! How will you form yours?
Here’s the charm on a memory wire beaded choker!
-
This Circle Pendant Is Simple and Beautiful, Load Yours up With Your Favorite Beads!
The highlight of this necklace is a lovely beaded circle pendant! You can use all kinds of lovely beads to make this design your own. note: contains affiliate links.
You will need the following tools and materials to make your necklace:
1: Pliers. You will need your cutting pliers, round nose pliers and flat nose pliers to make your necklace.
2: Wire. I used some copper wire to make my circle pendant. I cut mine to approximately 12cm in length.
3: Three jump rings.
4: A piece of chain at the length you want your necklace. I used copper chain to match the wire.
5: A lobster clasp. I used this copper colored one.
6: Beads of your choice. I used some red glass seed beads and some small timber beads.
Follow these steps to make your circle pendant necklace:
1: Create a loop at one end of the wire using the round nose pliers.
2: Add the beads to the wire in your choice of pattern.
3: Continue beading until there is approximately 1cm of wire remains unbeaded.
4: Bend the end of the wire so that it is at a right angle to the beaded section.
5: Create a loop at the end of the wire using the round nose pliers.
6: Attach the two loops together and close them to create a circle shape. You might need to gently reshape the loop to make it more of a circle shape.
7: Attach a jump ring to one of the loops at the top of the circle pendant.
8: Slide the ends of both chains onto the open jump ring.
9: Close the jump ring to secure the chain in place.
10: Split the chain in the middle opposite the place where the pendant is attached.
11: Add a jump ring to one side of the chain and add the lobster clasp. Close the jump ring to secure the lobster clasp in place.
12: Add the remaining jump ring to the other side of the chain to finish the necklace!
