How to Make Curved Bar Earrings Using Some Cool Tube Beads.

Do you like your earrings to be nice and curvy? This tutorial shows you how to make some sweet curved earrings that hang on delicate chains. Contains affiliate links.

You will need the following tools and materials to make these curved bar earrings:

1: Pliers. You will need your flat nose pliers, round nose pliers and cutting pliers to make these earrings.

https://amzn.to/3sClkjh

2: Two pieces of wire. I used this thick silver colored wire.

https://amzn.to/3wqdpbj

3: Two curved tube beads.

https://amzn.to/3MnQnan

4: Two pieces of chain. the length will determine how far your earrings drop. My pieces were approximately 10cm (approx 3.9 inches) long.

https://amzn.to/3MkH1fE

5: Two earring hooks.

https://amzn.to/39lUqFx

6: Four large jump rings.

7: Four small jump rings.

Follow these steps to make your curved earrings:

1: Create a loop at the end of one of the pieces of wire using the round nose pliers.

2: Add one of the long tube beads to the piece of wire.

3: Trim the wire using your cutting pliers until only approximately 1.5cm protrudes from the bead.

4: Create a second loop at the other end of the wire to secure the long tube bead in place.

5: Repeat steps 1 to 4 for the second charm using the other piece of wire and tube bead.

6: Add two large jump rings to either side of the curved charm, attaching them to the loops you just made.

6: Add a small jump ring to either end of the pieces of chain. (You won’t need to do this if you are using chain that has large links).

7: Attach the ends of the chain to the larger jump rings, closing the smaller jump rings to secure the ends in place.

8: Find the middle of the chain and attach one of the earring hooks to form a triangle shape.

9: Repeat step 8 for the second earring to make a pair.

Once you’ve finished both pairs your earrings are finished and ready to wear.