-
Here’s another way you can use memory wire to make jewelry…
Did you like our D-shaped earrings tutorial? Well here is how you can use a similar technique to make a beaded D-shaped pendant. This design includes a beaded chain accent as well. I really like this design and have made a few versions of it! Maybe you’ve seen some on my Instagram, @hfgjewelsbalmain ?
This tutorial contains affiliate links.
You’ll need these tools and materials to make this D-shaped beaded pendant necklace:
1: Pliers. I used cutting pliers, flat nose pliers and round nose pliers.
2: Half a coil of bracelet length memory wire.
3: One long eye pin.
4: Two pieces of chain.
5: A lobster clasp.
6: Six small eye pins.
7: A couple of jump rings.
8: Beads. I used six shiny blue plastic beads and a selection of pastel-tone glass seed beads.
Now here are all the steps to follow to make your D-shaped beaded pendant:
1: Add the blue beads to each of the small eye pins.
2: Create loops at the top of each pin to secure the beads in place.
3: Attach three of the bead charms together to form a short chain.
4: Repeat for the remaining three charms so that you have two small chains.
5: Set the bead chains aside.
6: Create a loop at one end of the memory wire.
7: Add the beads to the memory wire until there is only 1cm left without beads.
8: Create another loop at the other end of the memory wire to secure the beads on.
9: Add beads to the long eye pin and create a loop at the other end as you did with the memory wire.
10: Attach either end of the long eye pin to the loops at the end of the memory wire to form the D shape.
11: Attach each of the bead chains to either side of the D charm.
12: Attach a piece of chain to each of the bead chains to form the full length necklace chain.
13: Attach a lobster clasp to one side of the necklace using one of the jump rings.
14: Attach the other jump ring to finish the necklace.
Now it is finished and ready to wear! How will you customise this design?
Here are some other versions I have made:
This tutorial contains affiliate links.
-
Chunky chains are taking over. Here’s a DIY to get you in on the trend.
Apparently chunky chains are taking over from dainty delicate jewelry. Getting in on this cool new trend is super easy… here’s how to make your own chunky chain necklace.
You will need the following tools and materials to make your chunky chain necklace:
1: Pliers. You’ll need your round nose and flat nose pliers.
2: A chunky chain long in a length of your choice. I used this lightweight silver chain and made it choker length (fitting closely around the neck).
3: Two jump rings.
4: A lobster clasp.
Follow these steps to make your chunky chain necklace:
1: Add one of the jump rings to one end of the chain. Close it to secure it in place.
2: Add the other jump ring to the other end of the necklace.
3: Add the lobster clasp to the open jump ring.
4: Close the jump ring to secure the clasp in place and finish your necklace.
IT IS THAT SIMPLE! Now your chunky chain necklace is ready to wear!
