-
How to make a fun sequinned waist chain! It can also be a sparkly necklace.
This waist chain is so much fun! Attach a rainbow of sequins to your waist length chain for a fun and festive accessory you can add to all your fave outfits! Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials:
1: Pliers. I used my flat nose and round nose pliers for this DIY.
2: A piece of chain long enough to fit around your waist. I used some copper tone rolo chain.
3: A bunch of small jump rings.
4: A bunch of sequins with holes at the top.
5: Two larger jump rings.
6: A lobster clasp.
Here are the steps for making your sequin waist chain:
1: Add one of the larger jump rings to one end of the chain and attach the lobster clasp. Close the ring to secure the clasp in place.
2: Add the other larger jump ring to the other end of the chain.
3: Take a sequin and slide it onto one of the smaller jump rings.
4: Attach the sequin to the chain by sliding the open jump ring onto one of the chain links. Close the jump ring to secure it in place.
5: Continue adding sequins in your chosen pattern as you did in step 4 until the whole chain is sequinned up.
Now your rainbow sequin waist chain is ready to wear! So fun!
Here are some other sequin jewellery tutorials:
-
Sequins are so pretty, here’s how to add some to a necklace.
I am really loving sequinned jewelry right now. If you liked our sequin earrings and bracelet tutorials then you might like this one. Here’s how you can make a cute sequin charm necklace. This tutorial features affiliate links.
I used the following tools and materials to make my sequin charm necklace:
1: Pliers. I used flat nose and round nose pliers.
2: A piece of chain long enough to be a necklace. You can adjust the length to your preference.
3: Two medium sized jump rings for the ends of the necklace.
4: A lobster clasp.
5: A bunch of smaller jump rings for attaching the sequins to the chain.
6: Sequins. I used large sequins with holes at the top.
Follow these steps to make your sequin necklace:
1: Add one of the larger jump rings to one end of the necklace chain and attach the lobster clasp. Attach the other jump ring to the other side.
2: Add a smaller jump ring to the top of one of the sequins and attach it to the necklace, slightly to one side of the middle of the chain.
3: Continue adding sequins in the same manner until a centre portion of the necklace is covered in sequins.
Now your sequin necklace is finished and ready to wear! How cute and easy?!
This tutorial contains affiliate links.
-
Sequins are giving me life lately! Here’s how to make a sequin hand harness.
Hand harnesses are so fun! Add some even more fun to this design with some shiny sequins. This design is perfect for at home parties and showing off some sparkle during Zoom cocktail hours!
You’ll need the following tools and materials to make your sequinned hand harness:
1: Pliers. I used my round nose and flat nose pliers.
2: Chain.
3: A bunch of small jump rings.
4: Two larger jump rings.
5: A lobster clasp.
6: Sequins. I used these large disc sequins that have holes at the top.
Follow these steps to make your sequinned hand harness:
1: Measure your wrist and section off enough chain to fit around it.
2: Attach a longer piece of chain to the centre of the bracelet chain. Depending on the type of chain you are doing you can attach them together by opening one of the links on the longer chain and sliding it onto a link in the centre of the bracelet. If your links don’t open I suggest using a jump ring to join your chains together.
3: Drape the longer chain across your hand and around one of your fingers, make sure it is loose enough.
4: Trim the chain to the length you just measured out and attach the end of the chain to form a finger-sized loop.
5: Attach the two larger jump rings to either end of the bracelet section and attach the lobster clasp too.
6: Now add the sequins. I added mine using the smaller jump rings, attaching them to the centre part of the hand harness.
7: Continue adding the sequins until you have the look you want.
Now your sequinned hand harness is finished and ready to wear! Perfect for virtual cocktail hour.
Here’s another hand harness design you can make.
And here are some other sequin jewelry tutorials:
This tutorial contains affiliate links.
-
Here’s how to make a sequin charm bracelet. This is such a joyful design!
I really love this design, it is super fun to wear! Transform a piece of chain into a fun and sparkly charm bracelet with some large iridescent sequins. This is the perfect mate for our lightweight sequin earrings tutorial. Pop these guys on at home for the perfect video chat look! This tutorial contains affiliate links.
You’ll need the following tools and materials to make your sequin charm bracelet:
1: Pliers. I used round nose and flat nose pliers.
2: A piece of bracelet length chain with large-ish links.
3: Two large jump rings.
4: A lobster clasp.
5: A bunch of smaller jump rings.
6: Sequins with holes at the top.
Follow these steps to make your cute sequin charm bracelet:
1: Attach the large jump rings and clasp to either end of the bracelet chain.
2: Take a sequin and add one of the small jump rings to the top.
3: Keeping the jump ring open, slide it through one of the links of the chain.
4: Close the jump ring to secure the first sequin to the bracelet.
5: Repeat steps 2-4 until the bracelet is fully covered with sequin charms. I added mine approximately 4 links apart. These sequins are large so that they will overlap.
Once all your sequins are attached your sequin charm bracelet is finished and ready to wear!!
This tutorial contains affiliate links.
