-
Here’s how to make a necklace strand for your cute beaded person charm…
Remember this charm? Here’s how to make a crazy mixed bead necklace to hang it on and wear about! This tutorial makes use of those random mixed beads you aren’t sure what to do with! Please note, this tutorial contains affiliate links.
You’ll need these tools and materials to make your beaded necklace:
1: A person charm, you can follow the tutorial here.
2: A piece of tigertail wire, long enough for your desired necklace length, plus a few extra centimetres.
3: Four crimp beads.
4: A toggle clasp.
5: Two jump rings.
6: Pliers.
7: A selection of beads.
Follow these steps to make your necklace for your cute person charm:
1: Take the tigertail wire an add two crimps to one end.
2: Add a jump ring to the end of the wire.
3: Fold the end of the wire around the jump ring and through the crimp beads.
4: Squash the crimp beads using the flat nose pliers.
5: Begin adding beads.
6: Continue adding beads until you have a length you like.
7: Add the second set of jump rings to the other end of the necklace.
8: Add the second jump ring.
9: Loop the end of the wire around the jump ring and back through the crimp beads and the last couple of beads on the strand. Pull the wire tight.
10: Squash the crimp beads to secure the jump ring in place at the end of the necklace.
11: Trim the excess wire.
12: Open one of the jump rings using pliers and add the person charm.
13: Add the circle side of the toggle clasp and close the jump ring to secure the components together.
14: Add the other side of the toggle clasp and close the jump ring to finish the necklace off.
Now your adorable person charm necklace is finished and ready to wear! How cute!!
-
How to make a sweet fruity necklace with beads and some chain!
This necklace is super duper cute! Add some fruity polymer clay beads to eye pins and chain to create a fun beaded chain necklace perfect for adding some color and summer vibes to your wardrobe. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your fruity necklace:
1: A selection of polymer clay fruit beads.
2: The same number of eye pins.
3: Two pieces of chain slightly shorter than the necklace you want to make (The bead elements will make the necklace longer).
4: Two jump rings.
5: A lobster clasp.
6: Some pliers. I used my round nose and flat nose pliers for this piece.
Follow these steps to make your fruit necklace:
1: Add one of the beads to one of the eye pins.
2: Bend the pin to form an angle with the bead.
3: Loop the end of the pin using the round nose pliers. This will secure the bead onto the pin.
4: Repeat steps 1-3 for the rest of the fruit beads.
5: Attach all the fruit beads on their pins together to form a chain. Do this by slightly opening the loops with your pliers and then closing them again after sliding a charm onto the open loop.
6: Add one side of the chain to one end of the fruit chain you have just made attaching it as you did the fruit links in step 5.
7: Add the other side of the chain to the other side of the fruit section as you did in step 6.
8: Add a jump ring to one end of the chain and add the lobster clasp before closing it.
9: Add the other jump ring to the other side of the jump ring to finish it off.
Now your necklace is finished! How perfect and cheerful is this fruity design?!
Here are some other fruity jewelry tutorials you can make if you loved this one:
- A fruit themed waist chain
- Beaded hoops with glass fruit charms
- This perfectly simple apple bracelet
- This cute peachy anklet
- Strawberry dangle charm earrings
- Hot hot hot, a single chilli and pearl earring
- Orange threader earrings
- This yummy bell pepper necklace
- Fruit also features on this mixed bead necklace
- And on this simple strawberry necklace
- This letter bead bracelet has a happy banana on it
-
How to make a cute strawberry necklace!
This necklace is really easy to make and looks SOOOOO cute! Layer it with some other pieces or wear it on its own. All you need is a delicate chain and a strawberry-shaped polymer clay bead! Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your adorable strawberry necklace:
1: A polymer clay strawberry bead.
2: A delicate chain. I used this silver chain with a clasp already in place.
3: Pliers. I used my round nose and flat nose pliers.
Follow these steps to make your super duper cute strawberry necklace:
1: Remove the jump ring from one end of the chain. Open it up by using your pliers.
2: Thread the chain through the bead hole and pull it through. Now your bead will be on the chain. Move the bead to the middle of the chain.
3: Put the jump ring back onto the end of the chain. Close it again using your pliers.
Now your sweet little strawberry necklace is ready to wear! Will you choose a strawberry or a different kind of fruit?!
Here are some other fruit jewelry tutorials you can follow:
-
How to make a cute pair of beaded statement earrings!
These earrings are really cute, they are a twist on the typical beaded hoop, as they feature a beaded bar in the centre and are slightly oval in shape. I used some green and blue beads to make this pair of earrings. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make these earrings:
1: Two pieces of bracelet sized memory wire, one coil for each earring.
2: Two long eye pins.
3: Two jump rings.
4: Two earring hooks.
5: Beads. I used four plastic blue beads and some green glass beads.
https://www.ebay.com.au/itm/263927947665?hash=item3d7354e191:g:cjMAAOSwrKBgh0ma&frcectupt=true
6: Pliers. I used my cutting pliers, round nose pliers and flat nose pliers.
Follow these steps to make your statement earrings:
1: Add beads to the eye pins in your chosen pattern.
2: Bend the top of the pin to form an angle.
3: Loop the top of the pin using the round nose pliers.
4: Repeat steps 1-3 for the second eye pin.
5: Take one of the pieces of memory wire and loop one end using the round nose pliers.
6: Add beads to the wire. Bead to about half-way through the hoop.
7: Add one of the eye pins to the wire.
8: Add beads to the rest of the memory wire, leaving about 1cm without beads.
9: Loop the other end of the wire using the round nose pliers again. Thread it through the first loop you made before closing it fully.
10: Open the top loop of the eye pin and thread it through the two loops at the top of the hoop. Close it to secure the pin in place.
11: Repeat steps 1-10 for the second earring.
12: Attach an earring hook to each hoop using the jump rings.
Now your statement earrings are finished and ready to wear!! So cute and pretty!
-
How to make a letter bead chain bracelet!
Sometimes you need to be a bit subtle about how you communicate your feelings. So instead of saying it out loud, or showing it in your body language, why not show how you feel with your jewelry? Here are all the steps you can follow to make a cute letter bead bracelet that says a word on it. Mine says ‘grumpy’ because that’s how I feel a lot of the time ;). Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your letter bead chain bracelet:
1: A bunch of eye pins. The number you need depends on the length of your bracelet.
2: Two jump rings.
3: A lobster clasp.
4: Letter beads that make up the word you want to spell. Mine spells G-R-U-M-P-Y.
5: Other beads. I used some black plastic beads recycled from an old necklace. The number of extra beads you need will depend on the length of your word.
6: A small jump ring.
7: A charm. I used this plastic banana charm and drew a little smile on it with permanent marker.
Follow these steps to make your own letter chain bracelet:
1: Add a letter bead to one of the eye pins.
2: Bend the eye pin to form an angle.
3: Bend the top of the pin over to form a loop that secures the bead onto the pin. Use your round nose pliers to do this.
4: Repeat steps 1 to 3 for the other letter beads until your whole word is on pins.
5: Attach each of the letter bead pins together to form a chain.
6: Set the letter chain aside and start making the side chains.
7: Add your other beads to the pins the same way you did for the letter beads. Make two chains so that the whole piece is long enough to wrap around your wrist. Make each chain an even length so that your word sits in the middle.
8: Add a lobster clasp to one end of the bracelet using one of the jump rings.
9: Add the other jump ring to the other side of the bracelet.
10: To finish the bracelet off, attach your charm using the small jump ring.
Now your bracelet is finished and ready to wear! So cute!
Here are some other letter bead tutorials you can follow:
-
Here’s how to add beaded sections to your boho body chain!
Nothing screams warm weather like a bohemian body chain! This waist chain design is embellished with gemstones for a luxe bohemian look. As an added bonus, it can also be worn as a necklace during the colder months. Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials to make your beaded body chain:
1: A piece of chain that fits closely around your waist (It will get longer when you add the beads).
2: Pliers. I used my flat nose and round nose pliers.
3: Some eye pins. I used 8.
4: Two jump rings.
5: A lobster clasp.
6: Some beads. I used these pink gemstone chip beads.
Follow these steps to make your cute boho waist chain:
1: Add beads to a pin. I added four to each pin.
2: Bend the pin to form an angle with the beaded section.
3: Wrap the end of the pin around the round nose pliers to form a loop that secures the beads onto the pin.
4: Repeat steps 1 – 3 for the rest of the pins.
5: Line up the beaded pins along the chain so you can place them in a roughly even pattern.
6: Split the chain for the first beaded pin.
7: Attach one side of the pin to the first piece of chain, secure the pieces together by closing the loop on the beaded pin.
8: Attach the other side of the pin to the other piece of chain. Now you have a chain with one charm attached.
9: Repeat steps 6 to 8 for the rest of the beaded pins until they are all attached.
10: Add a jump ring to one end of the chain and slide on the clasp before closing it.
11: Add the other jump ring to the other end of the chain to finish it off.
Now your beaded waist chain is finished and ready to wear! What gemstones will you use on your cute body chain design?
Find some more waist and body chain tutorials here
-
Personalised jewelry is so special. Here’s how to make your own with cute colourful letter beads.
I think personalised jewelry will always be timeless and this tutorial shows you how to put a fun twist on a classic! Using colourful letter beads you can make a bracelet that says whatever you want. I started with initials but your only limit is your wrist size ;). Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make your personalised bracelet:
1: Your pliers. I used cutting pliers (left), flat nose pliers (right) and round nose pliers (middle).
2: Tiger tail wire. I used some silver tone tiger-tail and cut it a little longer than the circumference of my wrist.
3: Four crimp beads.
4: Two jump rings.
5: A toggle clasp.
6: Letter beads to make your choice of word. I used some initials.
7: Beads to surround the letter beads. I used blue glass seed and green bugle beads.
Follow these steps to make your personalised bracelet:
1: Add two crimp beads and a jump ring to one end of the tiger tail wire.
2: Fold the end of the wire around the jump ring and back through the crimps. Pull the end tight to secure the jump ring.
3: Squash the crimps using flat nose pliers to secure the end of the bracelet.
4: Begin adding beads in your chosen pattern.
5: Once you have beaded to approximately half-way around your wrist (this will vary depending on the length of your chosen word but for three initials the length is approximately half-way), add your letter beads.
6: Continue adding beads in the pattern you established on the other side to complete beading the bracelet. Make sure it fits closely around your wrist at this stage.
7: Add the remaining crimp beads to the end of the bracelet.
8: Also add the second jump ring.
9: Loop the wire around the jump ring and back through the crimps.
10: Pull the end of the wire tight.
11: Squash the crimp beads to secure the wire.
12: Trim the excess tiger tail wire.
13: Attach each part of the toggle clasp to either end of the bracelet by opening the jump rings and sliding them on. Close the jump rings to secure the clasp components in place.
Now your personalised bracelet is finished and ready to wear! Super cute and a great gift idea for a best friend or other loved one.
You can get these beads in a white tone as well, but I like the rainbow beads because they make your designs even more fun! What words will you add to your collection of personalised jewelry? Maybe a cute nickname or funny in joke?
This is our first letter bead tutorial, but I have used cute love heart beads in a similar shape to make another design, here it is:
-
Here’s how to make a fun hand harness with pearl tassel charms, so cool!
Are you bored at home staring at your hands with nothing else to do? Make them more interesting to look at with this fun hand harness! Making this should be fun and and you’ll have a cool accessory at the end. This tutorial contains affiliate links.
You’ll need these tools and materials to make your cool pearl tassel hand harness:
1: Pliers. I used my flat nose pliers and round nose pliers.
2: Chain that is long enough to wrap around your finger, the front of your hand and wrist. I used some gold-tone rolo chain.
3: Two medium jump rings.
4: A lobster clasp.
5: Pearl beads. I used eight pink pearl beads.
6: Eight smaller jump rings.
7: Eight head pins.
Follow these steps to make your pearl tassel hand harness:
1: Add each of the pearl beads to the head pins.
2: Curl the tops of the head pin around the round nose pliers to form loops and secure the beads in place. Once you have beaded and curled all eight pins you can set them aside.
3: Pick up the chain and create a loop that fits loosely around your middle finger.
4: Attach the end of the chain to the point where where it fits so that you have a loose loop of chain secured together. You can do this by opening one of the chain links and then closing it again around one of the links in the chain.
5: Measure a piece of chain so that it falls down the middle of your hand.
6: Then wrap the rest of the chain around your wrist, trim it and secure it into a large loop like you did with the ring part of the chain. Now you should have one small and one large loop with a single chain joining them.
7: Split the large loop so that it is open in the back opposite to the centre chain.
8: Attach the medium sized jump rings to either end of the open loop and attach the lobster clasp to one of them.
9: Now all that is left is to attach the pearl charms! Add the eight pearl charms to the centre chain that runs down the centre of your hand using the smaller jump rings.
Once all your pearls are attached your pearl tassel hand harness is finished and ready to wear!! So cute!
Here are some other hand harness designs that you can make:
This tutorial contains affiliate links.
-
Here’s how to make a bohemian waist chain with cute charms!
Summer in the Northern Hemisphere might be held mainly at home, but that doesn’t mean that you can’t dress for the occasion. Make this charm embellished waist chain to add some summer fun to your wardrobe! This tutorial contains affiliate links.
You’ll need these tools and materials to make this waist chain with charm embellishments.
The Materials
1: Pliers. I used my round nose pliers (centre), flat nose pliers (right) and cutting pliers (left).
2: A piece of chain that fits comfortably around your waist. I used copper tone chain.
3: Jump rings. I used two.
4: Some head pins. I ended up using a couple more because I added some charms I had made previously (see the second picture below).
5: Beads. I used a mixture of glass beads and a metal butterfly-shaped bead.
6: A lobster clasp. This is a bad picture but I used one that matched the tone of my chain.
The Steps
Follow these steps to make your charm embellished waist chain:
1: Add the jump rings to either end of the chain and attach the lobster clasp. Secure the clasp by closing the jump ring using pliers.
2: Find the middle of the chain and set it aside for a minute.
3: Add each of the beads to the head pins.
4: Bend the head pins to form right angles.
5: Trim the pins so that there is only approximately 1cm left. Use your cutting pliers.
6: Loop the top of the pins using the round nose pliers. This will secure the beads on the pins.
7: Attach the beads to the chain by looping the top of each charm through the chain links. I added my first charm to the centre and then worked outwards.
Now the waist chain is finished and ready to wear in the sun! Don’t forget your sunscreen though, this cool piece of jewelry could leave a weird tan line 😉
Here are some other waist chain tutorials:
This tutorial contains affiliate links.
