-
How to make a long pair of triangle dangle earrings!
It’s no secret that I really like making triangle shaped jewelry. Triangles are easy to construct using eye pins, and their angles add striking geometric features to your jewelry collection! These earrings feature three triangles each for a cool look. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this pair of triangle dangle earrings:
1: A set of pliers. I used my cutting pliers and round nose pliers most of the time. Flat nose pliers are handy to have around too.
2: Eighteen eye pins.
3: Six small jump rings.
4: A pair of larger jump rings.
5: A pair of earring findings.
6: Beads. I used some cute green glass seed beads.
Follow these steps to make your own pair of cute triple triangle dangles:
1: Add four beads to one of the eye pins.
2: Add one of the small jump rings.
3: Add another four glass beads.
4: Secure the beads in place by looping the end of the eye pin using your round nose pliers.
5: Repeat steps 1 to 4 for another pin.
6: Set the first pins with the jump rings aside.
7: Bead another four eye pins, this time skipping the step where you add the jump ring. These pins will just have beads.
8: Now attach two of the beaded pins to one of the pins with a jump ring to form a chain.
9: Attach the last pin on the chain to the loop at the other end of the first pin, this will form your triangle shape.
10: Repeat steps 8 and 9 to make another triangle with a jump ring pin on the top.
11: Set your first two triangles aside.
12: Now bead the rest of your eye pins like you did in step 7.
13: Form the pins into four more triangle shapes using the steps you performed in steps 8 and 9.
14: Now you can attach the triangles together.
15: And now you can attach three triangles together using the small jump rings, make sure you have the first triangle you made at the top.
16: Repeat step 15 for the other set of triangles.
17: Now you can attach an earring to each of the earrings, slide one of the bigger jump rings through the ring at the top of each triangle and through the loop on the earring finding. Close the jump ring to secure the earrings in place. Repeat this for the other earring.
So now you can wear your triangle earrings! Super cute and fun. What color will you make yours in?
Here are some other triangle earrings you can make:
-
How to make a beaded necklace with cute little bead charms!
This is a cute little piece that looks great layered with chains! Use some fun gemstone beads to add some pizazz to your design. Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this necklace:
1: Some tiger tail wire long enough to fit around your neck, plus some extra.
2: A set of pliers. I used my cutting pliers (left), flat nose pliers (right) and round nose pliers (middle).
3: Some glass beads. I used these green glass e-beads.
4: Some statement beads. I used 5 stone beads.
5: Four crimp beads.
6: Two jump rings.
7: Five head pins.
8: A lobster clasp.
Follow these steps to make your beaded charm necklace:
1: Add each of the statement beads to each of the head pins.
2: Curl the tops of each pin using the round nose pliers. This will keep the bead in place.
3: Set the charms aside.
4: Put two of the crimp beads onto the tiger tail wire.
5: Add one of the jump rings.
6: Loop the wire around the jump ring and back through the crimp beads. Pull the wire tight.
7: Squash the crimp beads using the flat nose pliers.
8: Begin adding beads to the wire.
9: Bead until you get to a length you like, before the middle of the wire.
10: Add the first bead charm from the set you made earlier.
11: Add some more glass beads and then add another bead charm.
12: Continue adding charms in your chosen pattern until they are all in place.
13: And now you can add the glass beads until your necklace is at the right length and is beaded evenly so that the bead charms are at the bottom.
14: Add the second pair of crimp beads and the jump ring.
15: Loop the wire around the jump ring and back through the crimps and the last few beads on the strand.
16: You should now pull the wire tight and squash the crimps with the flat nose pliers.
17: Now you can trim the excess wire with cutting pliers.
18: Open one of the jump rings and attach the lobster clasp. Close the ring to secure the clasp in place.
So now your necklace is finished and ready to wear! So so cute. What necklaces will you layer yours with?
Or maybe you’ll wear it as a statement on its own?!
-
How to add cute charms to a pair of hoop earrings… these charm hoops are perfect!
This is a simple DIY that looks really cute! Update a pair of hoops with some adorable glass star beads that dangle from the centre. I really like how these hoops show off the cutest little stars. As an added bonus, these are really simple to put together, giving you that instant gratification hit! Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials to make your charm hoops:
1: Pliers. I used my round nose pliers.
2: A pair of hoop earrings. I used these gold-tone hoops with lever backs.
3: A pair of head pins.
4: A couple of beads, I used these green star beads.
Follow these steps to make your charm hoop earrings:
1: Add each of the beads to each of the pins.
2: Bend the pins around the barrel of the round nose pliers to form a loop.
3: Slide each of the charms onto the hoops to finish off the earrings!
Now they’re ready to wear! How cute are these little charm hoops? I love them!
Here are some other charm hoop earrings you can make:
-
How to make a super cute bracelet with beaded diamond shapes!
This is a cute little bracelet that looks great! the beaded diamond bracelet design uses eye pins and beads to form a series of diamond shapes that link together to create a bracelet. This diamond shaped bracelet is eye-catching and fun to put together, perfect for constructing on a quiet afternoon at home.
You’ll need these tools and materials to make your beaded diamond bracelet:
1: Pliers. I used my round nose and flat nose pliers.
2: A bunch of eye pins. I ended up using about 25 pins. You may need more or less depending on your wrist size.
3: Some small jump rings. I used four, you may need more or less depending on the size of the bracelet.
4: Two larger jump rings.
5: A toggle clasp.
6: Beads of your choice. I used these green glass e-beads.
Follow these steps to make your beaded diamond bracelet:
1: Add beads to two of the eye pins.
2: Leave about 1cm without beads.
3: Bend the pins to form an angle with the beaded section.
4: Loop the end of the pins around the round nose pliers to create a loop that secures the beads onto the pins.
5: Link the two pins together.
6: Repeat steps 1-5 three more times so that you have 5 beaded pins.
7: Link two more pins to the first two, so you have a square shape.
8: Add the last pin to the middle of the four linked pins so that you have a diamond shape that doesn’t shift around.
9: Repeat steps 1-8 until you have enough diamond shapes to fit around your wrist. I ended up making 5 diamonds.
10: Attach each of the diamond shapes together with the small jump rings to form a chain.
11: Attach the clasp components to each end of the chain using the larger jump rings, this will finish the design off!
Now your beaded diamond bracelet is finished and ready to wear!
Here is another design you can make using this beaded diamond shape
-
Here’s how to make a pair of cute beaded chain earrings!
These earrings are made using soft wire and beads to make a chunky chain that dangles from each ear. These really cute earrings are fun to make and look so fun.
You’ll need these tools and materials to make these earrings:
1: Pliers. I used my cutting pliers (left), flat nose pliers (right) and round nose pliers (middle) to make these earrings.
2: Some thin soft wire. I used six pieces (approx 7cm long) of wire that I recycled from an old project.
3: Some beads. I used green and gold glass e-beads.
Gold beads: https://amzn.to/3S3zwfi
Green beads: https://amzn.to/3QTdMlj
4: Two small jump rings.
5: Two earring hooks.
Follow these steps to make your chunky bead chain hoops:
1: Take a piece of wire and curl one end around the round nose pliers.
2: Add beads to the wire until there is 1cm left without beads.
3: Put the end of the wire back through the first loop you made.
4: Curl the other end of the wire so that the beaded circle is closed.
5: Make another beaded circle, thread it through the first circle you made before you secure it closed.
6: Make a third beaded circle and attached it to the first two so that you have a chain of three.
7: Repeat steps 1 to 6 for the second earring.
8: Attach the earring hooks to the top of each chain using the small jump rings.
Now your chain earrings are finished and ready to wear!!!
Here is a four link version I made as well
This tutorial contains affiliate links.
-
How to make a double-strand knot necklace.
This one didn’t really turn out how I had anticipated, but I thought I would share it with you anyway. I had more success making two beaded strands to knot together compared to this design that knots together a beaded strand with a chunky chain. If you don’t want the chain just make one bead strand and knot it loosely in the middle for a cool knot necklace look! This tutorial contains affiliate links.
You’ll need the following tools and materials to make your double-strand knot necklace:
1: Tiger tail wire. Make it a little longer than the chain you are using.
2: Four crimp beads.
3: Pliers. I used cutting, flat-nose and round-nose pliers.
4: A length of chunky chain.
5: Two jump rings.
6: A lobster clasp.
7: Beads. I used some blue plastic beads and some green glass beads.
Follow these steps to make your two-strand knot necklace.
1: Add the crimps to one end of the tiger tail wire.
2: Add the jump ring and loop the end of the wire around it and back through the crimp beads.
3: Squash the crimp beads using the flat nose pliers.
4: Begin adding the beads in your chosen pattern.
5: Bead until it is at your desired length.
6: Add the second pair of crimp beads to the wire and repeat steps 2 and 3 to secure the beads onto the strand.
7: Trim the excess wire using the cutting pliers.
8: Add the chain to the bead strand by opening the jump rings at either end of the necklace and adding the ends of the chain.
9: Add a lobster clasp to the necklace.
10: Tie the strands into a loose knot that sits at the centre of the necklace opposite the lobster clasp closure.
Now your necklace is finished and ready to wear! Like I said, the chain looks a bit weird on this one, so you can leave it out if you like. You could also make the double strand necklace and skip the knot!
You can make this necklace with materials you already have, but if you need some new supplies this tutorial contains affiliate links.
