-
Gorgeous DIY Pearl Necklace: Unleash Your Crafty Charm with this Unique knotted pearl necklace
I love pearl jewellery, but the classic pearl necklace can often look a bit dated, so I decided to try and create a pearl necklace that is a bit more modern! This tutorial shows you how to make a lovely mixed pearl necklace with a knot in the middle for some added visual interest and cool vibes. Please note that this tutorial contains affiliate links.
You’ll need the following tools and materials to make your knotted pearl necklace:
1: Pearls. I used a variety of freshwater pearls in different colours and sizes.
You can purchase some here:
2: Some tiger tail wire. I used some thin black tiger tail.
You can get some here:
3: Your pliers. I used my cutting pliers and flat nose pliers.
You can get a set of jewellery pliers here:
4: A sterling silver clasp and jump ring.
You can get clasps here:
and you can get pre-made jump rings here:
5: Two sterling silver crimp ends.
you can get some sterling silver crimp beads here:
Follow these steps to make your own gorgeous twist on a timeless classic, a knotted pearl necklace:
1: Add a crimp bead to the tiger tail wire.
2: Take the clasp and place it on your tiger tail.
3: Loop the tiger tail around the clasp once and pull it tight (You don’t need to do this if you are using thicker tiger tail wire).
3: Put the short end of the wire through the crimp.
4: Squash the crimp using the flat nose pliers.
5: Add pearls until you have a necklace that is about 7cm longer than the length that you want your necklace to fall.
6: Add the second crimp to the other end of the wire.
7: Thread the wire through the jump ring like you did in steps 1 and 2, pulling it tight and then threading it through the crimp and the first few pearls on the strand. (Remember that if you are using thicker wire, you don’t have to do the extra wire looping around the jump ring).
8: Squash the crimp using flat nose pliers.
9: Trim excess wire using cutting pliers.
10: Take the ends of the wire and knot them as though you are making a basic square or reef knot, but omitting the second step. Adjust the knot to your preferences, moving it to the centre and trying not to make it too tight.
Once your knot is in place, your knotted pearl necklace is ready to wear! How cute!
What colour pearls will you use when you make yours?
If you’re looking for some more pearl jewellery tutorials to follow, you can find some here:
Pearl Earrings
- Mixed bead pearl drop earrings
- A single pearl earring with a chilli charm on the end.
- Pearl and love heart earrings
- Colourful pearl statement earrings
- Rainbow pearl drop earrings
- Pearl tassel hoop earrings
- Pearl hoop earrings
- Pearl charm huggies
- Cresent moon pearl charm earrings
- Shell and pearl earrings
- Simple pearl threader earrings
Pearl Necklaces
- Pearl charm lariat
- Floating pearl necklace
- Colourful beaded pearl necklace
- Single floating pearl necklace
- Mixed bead necklace with pearls
Other pearl accessories
-
Here’s how to make a single floating pearl necklace!
I’ve made a floating pearl necklace before using multiple pearls, you can see the tutorial here. This design is a bit different. For this one you won’t need extra crimp beads, the pearl instead slides freely on the tiger tail wire! I also added some crimp covers on this version so that the trimmed tigertail ends don’t scratch your neck! Please note that this tutorial contains affiliate links.
You’ll need these tools and materials to make this floating pearl necklace:
1: Pliers. I used my cutting pliers, flat nose pliers and round nose pliers for this floating pearl necklace.
Cutting pliers (left), Round nose pliers (middle) and flat nose pliers (right) 2: Tiger tail wire. Cut to your desired length, I made mine a bit longer than I usually like, but you can check your length by holding the wire loosely around your neck or measuring the wire against the length of your fave necklace and adding about 3cm extra.
3: Two crimp beads.
4: Two crimp cover findings.
5: A pearl bead. I used this oval shaped freshwater pearl bead.
6: A clasp and extra jump ring.
Follow these steps to make your floating pearl necklace:
1: Add a crimp bead to one end of the wire.
2: Loop the end of the wire back through the crimp to create a loop.
3: Pull the loop tight around the crimp bead.
4: Squash the crimp bead using flat nose pliers and then trim the excess wire at the end.
5: Add a crimp cover from the other end of the wire, pulling it so that it sits around the squashed crimp bead.
6: Close the crimp cover around the squashed crimp bead using the flat nose pliers.
7: Add the pearl to the wire.
8: Add the second crimp cover to the wire and let it fall out of the way.
9: Add the second crimp bead to the wire and repeat the loop that you did in steps 2-4.
This is before trimming the excess wire. I suggest trimming the wire before closing the crimp cover. 10: Pull the crimp cover back up the wire and fold it around the crimp bead end, close it carefully using the flat nose pliers.
11: Use the loops at the end of the crimp covers to attach the clasp to one side of the necklace and the jump ring to the other side. Shape and close the crimp cover loops using the round nose pliers.
Once the clasp has been attached, your floating pearl necklace is ready to wear! Would you wear this piece as a simple statement or layered with other pieces?
Here are some other pearl necklace designs you can make:
-
Here’s how to make a fun hand harness with pearl tassel charms, so cool!
Are you bored at home staring at your hands with nothing else to do? Make them more interesting to look at with this fun hand harness! Making this should be fun and and you’ll have a cool accessory at the end. This tutorial contains affiliate links.
You’ll need these tools and materials to make your cool pearl tassel hand harness:
1: Pliers. I used my flat nose pliers and round nose pliers.
2: Chain that is long enough to wrap around your finger, the front of your hand and wrist. I used some gold-tone rolo chain.
3: Two medium jump rings.
4: A lobster clasp.
5: Pearl beads. I used eight pink pearl beads.
6: Eight smaller jump rings.
7: Eight head pins.
Follow these steps to make your pearl tassel hand harness:
1: Add each of the pearl beads to the head pins.
2: Curl the tops of the head pin around the round nose pliers to form loops and secure the beads in place. Once you have beaded and curled all eight pins you can set them aside.
3: Pick up the chain and create a loop that fits loosely around your middle finger.
4: Attach the end of the chain to the point where where it fits so that you have a loose loop of chain secured together. You can do this by opening one of the chain links and then closing it again around one of the links in the chain.
5: Measure a piece of chain so that it falls down the middle of your hand.
6: Then wrap the rest of the chain around your wrist, trim it and secure it into a large loop like you did with the ring part of the chain. Now you should have one small and one large loop with a single chain joining them.
7: Split the large loop so that it is open in the back opposite to the centre chain.
8: Attach the medium sized jump rings to either end of the open loop and attach the lobster clasp to one of them.
9: Now all that is left is to attach the pearl charms! Add the eight pearl charms to the centre chain that runs down the centre of your hand using the smaller jump rings.
Once all your pearls are attached your pearl tassel hand harness is finished and ready to wear!! So cute!
Here are some other hand harness designs that you can make:
This tutorial contains affiliate links.
-
Combine the latest trends in one awesome design with this pearl anklet!
Pearls and anklets are having a moment right now. Hop in on the trend with this rainbow pearl beaded anklet. Contains affiliate links.
You’ll need the following tools and materials to make your pearl anklet:
1: Pliers. You’ll need cutting pliers, flat nose pliers and round nose pliers to make your anklet.
2: Tiger tail wire. Cut it a little longer than the length you want to make your anklet.
3: Four crimp beads.
4: Two jump rings.
5: A lobster clasp.
6: Pearl beads. I used three pink freshwater pearls.
7: Mixed beads. I used a mix of bugle and seed beads.
Follow these steps to make your pearl anklet:
1: Add two crimp beads to one end of the wire.
2: Add a jump ring.
3: Loop the wire around the jump ring and through the crimp beads.
4: Squash the jump rings using the flat nose pliers.
5: Add your beads. I added mine in a pattern with the pearls situated close to one side of the anklet.
6: Once your anklet is fully beaded add the remaining crimp beads.
7: Add the second jump ring.
8: Loop the end of the wire around the jump ring and through the crimp beads and the end few glass beads.
9: Pull the wire tight.
10: Squash the crimps using the flat nose pliers.
11: Trim the excess tiger tail wire.
12: Add the clasp to one side of the anklet. Close the jump ring to secure it in place.
Now your pearl anklet is finished and ready for a summer #ankleparty.
